User manual MARANTZ VP8600
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MARANTZ VP8600. We hope that this MARANTZ VP8600 user guide will be useful to you.
You may also download the following manuals related to this product:
MARANTZ VP8600 PRODUCT BROCHURE (3633 ko)
MARANTZ VP8600 SUPPLEMENTARY GUIDE (70 ko)
Manual abstract: user guide MARANTZ VP8600
Detailed instructions for use are in the User's Guide.
[. . . ] Model VP8600 User Guide DLPTM Projector
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Note : When projecting a video image from a device connected to the DVI-D terminal, follow the procedure below. Turn on power of the device connected to the DVI-D terminal of the unit (i. e. For the details of the DVI-D terminal on the device connected with the unit, see the instruction manual of the device.
STANDBY
FL OFF
SCART CONNECTOR
DVD Player
COMPONENT 1: RGB When connecting the COMPONENT 1 terminal to the RGB HV out terminal, set COMPONENT 1 settings to [RGB]. ( P. 19)
5RCA cable (commercially available)
RGB (D-Sub monitor) cable (commercially available)
RGB out RGB OUT or or DVI-D out DVI-D out or HDMI out
V
H
R
B
G
MONITOR OUT
HD-Video / Satellite / Cable Tuner / DVD Player PC
Monitor output RGB OUT RGB out or or DVI-D out DVI-D out
DVI-D cable (commercially available)
IBM VGA or Compatible PC
8
Advanced Connection
You can control total home theater system using PC. ENGLISH
Screen
External Controller
RS-232C cable (straight type, commercially available)
3. 5mm Mini Plug (Mono) (commercially available)
9
INITIAL SETTING
Turning on the Power
1. Connect the other end to a wall outlet.
Turn on the main power switch. The Power LED blinks (blue) slowly.
Adjust the Zoom, Focus and Keystone
1. Use the ZOOM ring (on the projector) to resize the projected image and screen size. Use the FOCUS ring (on the projector) to sharpen the projected image.
ENGLISH
FOCUS RING
ZOOM RING
2. Press the ON button on the remote controller to turn on the projector.
The Power LED lights blue and the projector splash screen displays.
3. Press the EXIT button twice to close the OSD.
STANDBY
ON
COMP. 1
COMP. 2
S VIDEO
FULL
C1
DVI
C2
RGB
S
VIDEO
F
NORMAL
DV1
RGB
V
N
THEATER STANDARD DYNAMIC ZOOM1
THTR
STD
DYN
C-TEMP
Z1
ZOOM2
LOW-BRIGHT- HIGH
LB
HB
CT
Z2
5. Press the INPUT 3 or INPUT 4 key to select the input signal source.
V-MUTE
MENU
M
4
INPUT
V-MUTE
MENU
3
INPUT
M
F
FREEZE PIP ON/OFF INPUT SWAP MENU
E
EXIT
CONTRAST CONCON+
BRIGHTNESS BRIBRI+
5, 6
F
FREEZE PIP
E
EXIT
7
10
Adjusting the Image
There are hot keys on the remote control that let you adjust contrast, sharpness, tint, color, brightness. When you press one of these hot keys, a slide bar is overlayed on the source image. Press the EXIT button to close an image slide bar, or press an image hot key to automatically close the current slide bar and open the next.
Tint Control
1. Press the TINT+ / TINT button.
The tint slide bar appears.
CONTRAST CONCON+ BRIGHTNESS BRIBRI+
2. Press the TINT+ / TINT button to
Contrast Control
Use the contrast control to adjust the contrast between light and dark areas of the projected image.
increase/decrease the tint.
TINT+ TINT-
SHA+ SHAPRAESS SHA-
TINT+ TINT TINT-
COL+ COLOR COL-
WHITE PEAK W-PEAK INFO.
3. Press the CON+ / CON button.
The contrast slide bar appears.
F
FREEZE PIP ON/OFF INPUT
E
EXIT
2. Press the CON+ / CON button to
increase/decrease the contrast.
SWAP
MENU
CONTRAST
BRIGHTNESS BRIBRI+
3. Press the EXIT button to close the
contrast slide bar.
CONCON+
CON-
CON+
SHA+ SHAPRAESS
TINT+ TINT
COL+ COLOR
WHITE PEAK W-PEAK INFO.
Color Control
Use the color control to adjust the color saturation level. Press the COL+ / COL button.
The color slide bar appears.
CONTRAST CONCON+
BRIGHTNESS BRIBRI+
2. Press the COL+ / COL button to
Sharpness Control
Use the sharpness control to adjust the image sharpness. The sharpness control is not available in PC mode.
increase/decrease the color.
COL+ COL-
SHA+ SHAPRAESS
TINT+ TINT TINT-
COL+ COLOR COL-
WHITE PEAK W-PEAK INFO.
3. [. . . ] · Use some other electrical device to confirm that the electrical outlet is working. · Ensure a connected notebook computer is configured for an external display. (This is usually done by pressing an Fn-key combination on the notebook. )
ENGLISH
Image Problems
Problem: No image appears on the screen
1. Turn off all equipment and power up again in the correct order.
Problem: The image is blurred
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ VP8600
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ VP8600 will begin.