User manual LG GCF-5238TI
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG GCF-5238TI. We hope that this LG GCF-5238TI user guide will be useful to you.
Manual abstract: user guide LG GCF-5238TI
Detailed instructions for use are in the User's Guide.
[. . . ] : Warning and Caution are indicated in this guide and the product itself to help protect the users from danger.
WARNING
I Installation
Entrust installation of the product to the service center because improper installation may cause fire, an electric shock, explosion, and physical injury.
Service Center
Use the original parts in order to prevent fire, an electric shock, explosion, and product breakdown.
Keep combustible and/or inflammable materials away from the product in order to prevent fire or product breakdown.
Original Parts
Do not disassemble, repair, or modify the product at your discretion in order to prevent fire or an electric shock.
Do not install the product in wet and humid areas in order to prevent product breakdown.
Do not expose the product to the sun in order to prevent product breakdown.
Owner’s & Installation Manual 3
Safety Precautions
I In-use
Do not modify or lengthen the power cable at your discretion. It may cause an electric shock or product breakdown.
Do not place something heavy on the power cable. It may cause fire or an electric shock.
Do not place a heavy thing on the product. [. . . ] It may cause product breakdown.
If the product was submerged under water, ask the service center for instruction. It may cause fire or an electric shock unless you do that.
v Ser ice Cen ter
CAUTION
Make sure children or senor citizens use the product under proper observation in order to prevent safety accident. It may cause product breakdown with the damage to its parts.
I In-use
Do not clean the product with strong cleanser such as solvent. It may cause product breakdown or an electric shock.
4 Simple Wired Remote Controller
Part Description
Part Description
ENGLISH
1. Wired Remote Controller
GCF-5238TI
Defrost
Slo Lo Med Hi Po
Preheat Out door
Room Temp Total on Central Run
2. Connecting Cable and Connector
Cooling Heating Auto Dry Fan
ROOM TEMP
FAN SPEED
Accessory
Connecting Cable (1EA)
Fixing Screw (2EA)
User / Installation Manual
Installation Paper
Owner’s & Installation Manual 5
Part Description
Simple Wired Remote Controller
1. Operation Display Panel
GCF-5238TI
Defrost
Slo Lo Med Hi Po
Preheat Out door
Room Temp Total on Central Run
1
2. Temperature Control Button
Cooling Heating Auto Dry Fan
2 3 4
5. Room Temperature Check Button
ROOM TEMP
FAN SPEED
5
Each function will be shown on the display panel for three second or so when the power is applide at first.
6 Simple Wired Remote Controller
Installation Method
Installation Method
1
Put the installation paper on the place and determine the position and height of the fixing screws of the wired remote controller. Then the ESP setting will be activated after the temperature display flashes three times.
Lo Med
200 Setting the Low wind to 210
100 Setting the Medium wind to 175
* The E. S. P value is set at the proper value at the factory. So it is highly recommended that you should do not change the E. S. P value at your discretion.
10 Simple Wired Remote Controller
How to use the Mode Selection Button
How to use the Mode Selection Button
Cooling Operation
ENGLISH
1 2
GCF-5238TI
If you want to start the cooling operation, press the On/Off button. The cooling mode can be set from Central Controller only.
Press the temperature button and set the desired temperature lower than the current room temperature. (18~30°C)
A click of the button will increase the desired temperature by 1°C. A click of the button will decrease the desired temperature by 1°C.
Defrost
Preheat Out door
* If the desired temperature is set higher than the current room temperature, the cooling function will not begin and just the fan operation will continue.
ROOM TEMP
FAN SPEED
3 4
If you want to change mode during the operation, the operation mode will be changed by only Central Controller.
If you press On/Off button again, the cooling operation will stop.
What is the three-minute delay function?The function to protect the compressor delays the output of cool air when operating instantly after interrupting the cooling operation. Cooling operation restarts after 3 minutes when the compressor starts to operate.
• You can choose the expected temperature from 18(C to 30(C. • It is recommended that the ideal difference of the temperature between indoors and outdoors should be less than 5°C.
Owner’s & Installation Manual 11
How to use the Mode Selection Button
Heating Operation
1 2
GCF-5238TI
If you want to start the heating operation, press the On/Off button. The heating mode can be set from Central Controller only.
Set the desired room temperature higher than the current room temperature. [. . . ] • It is recommended that the ideal difference of the temperature between indoors and outdoors should be less than 5°C.
Owner’s & Installation Manual 11
How to use the Mode Selection Button
Heating Operation
1 2
GCF-5238TI
If you want to start the heating operation, press the On/Off button. The heating mode can be set from Central Controller only.
Set the desired room temperature higher than the current room temperature. (16~30°C)
Defrost
Preheat Out door
Room Temp Total on Central Run
A click of the button will increase the desired temperature by 1°C. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LG GCF-5238TI
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG GCF-5238TI will begin.