User manual LEICA IMS500 HD

[. . . ] those of light bulbs. Leica IMS500 / IMS500 HD Manual 4 Important Notes Description The Leica IMS500 Systems meets today's state of the art of technology. User Manual This user manual includes important instructions related to operating safety, maintenance and accessories. Accessories from third-party suppliers You can combine individual system articles with articles from external suppliers. Please read the user manual and the safety requirements of the supplier. [. . . ] If you use accessories made by third-party manufacturers with the Leica IMS500 Systems system, be sure that each such manufacturer confirms that the combination is safe to use and observe the product's user manual. Modifications and maintenance of the Leica IMS500 Systems system may only be performed by professionals expressly authorized by Leica. Only original Leica replacement parts may be used in servicing the product. After service work or technical modifications, the unit must be reconfigured with observance to our technical requirements. If the unit is modified or serviced by unauthorized persons, is improperly maintained (as long as maintenance was not carried out by us), or is handled improperly, Leica will not accept any liability. The electric installation in the building must conform to the national standard, e. g. current-operated ground leakage protection (fault-current protection) is suggested. Ensure that this user manual is always available. Carry out regular inspections to make certain that the authorized users are adhering to safety requirements. When instructing new users, do so thoroughly and explain the meanings of the warning signs and messages. Assign individual responsibilities for starting, operating and servicing the instrument and monitor the observance of these responsibilities. Do not use the Leica IMS500 Systems system unless it is in perfect condition. Leica IMS500 / IMS500 HD Manual 7 Care instructions General instructions Protect the Leica IMS500 Systems against damp, vapors, acids, alkalis, and corrosive substances. Protect the Leica IMS500 Systems from oil and grease. Never use chemicals to clean colored surfaces or accessories with rubberized parts. This could damage the surfaces, and specimens could be contaminated by abraded particles. It is advisable to enter a service agreement with Leica Service. Cleaning coated parts and plastic parts Dust and dirt particles should be removed with a soft brush or lint-free cotton cloth. Remove coarse debris with a moistened disposable cloth. Acetone, xylene or nitro-containing thinners must NOT be used. Leica IMS500 / IMS500 HD Manual 8 Accessories, maintenance and repair Accessories Only the following accessories may be used with the Leica IMS500 Systems: The Leica accessories described in this user manual. Other accessories, provided that these have been expressly approved by Leica as being technically safe in this context. Maintenance The Leica IMS500 Systems are basically maintenancefree. To ensure that it always operates safely and reliably, we recommend that you take the precaution of contacting the responsible service organization. Repairs and service work Only original Leica Microsystems spare parts may be used. Before opening the instruments, switch off the power and unplug the power cable. Avoid contact with powered electrical circuits, which can lead to injury. them. appropriate, conclude a maintenance contract with You can arrange for periodic inspections or, if It is advisable to enter a service agreement with Leica Service. For maintenance and repair, only OEM spare parts may be used. Service address In case of problems, please contact us as follows: Leica Microsystems (Switzerland) Ltd. Industry Division Max Schmidheiny Strasse 201 CH-9435 Heerbrugg (Switzerland) Phone +41 71 726 33 28 Leica IMS500 / IMS500 HD Manual 9 Electrical data and ambient conditions Electrical data See specifications page Environment Temperature for use Storage temperature Manipulation shock Transport shock (unpacked) Transport shock (packed) Transport vibrations (unpacked Atmospheric pressure "in use" and for storage: Humidity "in use" and for storage: Installation Category II (Overvoltage Category) Pollution degree 2 Unpacking Carefully remove the system and any components from the packing carton. Optional items such as camera adapters, cameras, and carrying cases are not shipped as part of the standard equipment. They should be used for safely storing and transporting the instrument should the need arise. +10 °C . . . The transmitter is indicated by flashing light, receivers by permanent light. To select a new transmitter, hold the key pressed down for about 1 second or reset the system (VIDEO OFF) and start a new input sequence. Leica IMS500 / IMS500 HD Manual 15 Keypad functions Clear & Reset the system The system is cleared and all selections are turned off. [. . . ] A students´screen must first be transmitted to the instructor. + + + Remote control of all student computers (PS/2 system only) To control all student´s keyboards and mouses hold down the ALT FUNCT key while pressing the REMOTE key. Leica IMS 500 Manual 18 Keypad Dimensions* (W-H-D) Weight Power Communication Specifications IMS500 Type KP15 Type KP25 12. 5 x 4 x 17cm 15 x 4 x 21 cm ca. 550 g 5VDC and 10VDC supplied by Central Unit Serial 4Wire RS-232 Protocol Type KP35 19. 5 x 4. 5 x 22 cm ca. 800 g * Dimensions of keyboard only (no cables/plugs). Central Unit Dimensions* (W-H-D) Weight Power Consumption CU15 24 x 15 x 28 cm max. 300 W * Dimensions of rack only (no cables/plugs Modules Dimensions* (W-H-D) Weight Power Imaging Module 11. 5 x 3. 2 x 9 cm (no cables connected) 175 g +10VDC and -10VDC supplied by Central Unit Computer Control Module * Dimensions of box only (no cables/plugs). [. . . ]