User manual LA CROSSE TECHNOLOGY WS-9412

[. . . ] This Atomic Clock regulates the WWVB transmitter. QUICK SET-UP GUIDE 1. If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). Mount the WS-9412U in a suitable location, where WWVB signals can be received. GB P. 2 P. 3 GB DETAILED SET-UP GUIDE I. BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. Battery Compartment "8" will appear in the hour position and the seconds will appear in the minute display. [. . . ] Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 3 more times, until the hour "12:00" flashes in the time LCD. Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. Press and release the "SET" button to confirm the hour setting, and to shift to select the minutes. Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 4 more times, until the default year "00" flashes in the date LCD. Press and release the "SET" button to confirm the time zone setting, and to advance to DST (Daylight Saving Time) setting. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is "On", meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST "OFF". GB P. 6 GB 2. Press and release the "SET" button to confirm the year, and to set the month. Press and release the "+" button to select the appropriate month. Press and release the "SET" button to confirm the month, and to set the date. Press and release the "+" button to select the appropriate date. Press and release the "SET" button to confirm the date, and to set the weekday. The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. Press and release the "SET" button to confirm the calendar settings, and to advance to select either °F or °C temperature display. Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 10 more times, until the default "°F" flashes in the time LCD. Press and release the "+" button to toggle between °F and °C. Press and release the "SET" button to confirm the °F or °C selection, and exit the Program Mode. 1. Press and release the "+" button a 2 time and the display will return to the normal display. INDOOR TEMPERATURE The Indoor Temperature appears on the right side of the Date LCD. [. . . ] Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. [. . . ]