User manual LA CROSSE TECHNOLOGY WS-9031U INSTRUCTION MANUAL

[. . . ] WEATHER PROJECTION STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this state-of-the-art weather projection station as an example of innovative design and quality piece of engineering. Providing radio controlled time, date, calendar, moon phase, indoor and outdoor temperature, indoor and outdoor relative humidity, this unit will never keep you guessing on current and future weather conditions. By reading this operating manual, the user will receive a better understanding of the weather projection station together with the optimum benefit of all its features. FEATURES: The Weather Projection Station SNOOZE key Function keys Projector LCD Display Battery compartment Function keys · · · · · · · · · · · · · · · · · · · · · WWVB Radio controlled time with manual setting option Time reception ON/OFF (user selectable) 12/24 hour time display DST ON/OFF (daylight saving time) US time zone map Time zone option ±12 hours Month, date, weekday calendar display Alarm setting with snooze function Automatic daylight saving time Display 12 moon phases throughout the year with moon/tide indication Weather forecasting with 3 weather icons Weather tendency indicator Indoor comfort indicator Temperature display with MIN/MAX records and time of reception Indoor and outdoor temperature display in ºC/ºF Humidity data with MIN/MAX records Indoor and outdoor humidity display as RH% Can receive up to 3 transmitters Time projection display (hour and minute) Outdoor temperature projection display (degrees ºC or ºF) Alternate projection display mode selectable · · · · · · Projection with adjustable brightness and projection orientation possible LCD contrast selectable LED back light Low battery indicator Table standing AC/DC power adapter included The Outdoor Thermo-hygro Transmitter Rain protection cover Wall mounting base · · · Remote transmission of outdoor temperature and humidity to Weather Projection Station by 433 MHz Rain proof casing Wall mounting case TO INSTALL AND REPLACE BATTERIES IN THE WEATHER PROJECTION STATION The Weather Projection Station uses 3 x AA, IEC LR6, 1. 5V batteries. To install and replace the batteries, please follow the steps below: 1. [. . . ] The Time Reception and the "WWVB" icons will not be displayed on the LCD. 12/24-HOUR SETTING: Flashing The hour display can be selected to show hours in 12-hour or 24-hour settings. Use the CH/+ key to toggle between "12H" or "24H". Confirm with the SET key and enter the Manual time setting. MANUAL TIME SETTING: In case the Weather Projection Station cannot detect the WWVB-signal (for example due to disturbances, transmitting distance, etc. ), the time can be manually set. 5. Note: The unit will still try to receive the signal between 12:00 to 6:00 a. m. every day despite it being manually set and if the WWVB time reception function has been set ON. When it does receive the signal, it will change the manually set time into the received time. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted the following hour. CALENDAR SETTING: Date and month (24hr time format) Month and date (12hr time format) Year The date default of the Weather Projection Station is 1. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. Press the SET key again to confirm and to enter the date setting mode. Confirm all calendar settings with the SET key and enter the Snooze setting. SNOOZE SETTING: Snooze time The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes): 1. The snooze can also be set OFF when the "OFF" digit is being displayed. Confirm with the SET key and enter the Temperature setting Note: If the snooze time has been set "OFF", the snooze function will not be activated. °F/°C TEMPERATURE SETTING: Digit flashing The temperature display can be selected to show temperature data in °F or °C (Default °F). 1. 2. Use the CH/+ key to toggle between "°F" or "°C". Confirm with the SET key and enter the Weather forecasting icon sensitivity setting. WEATHER FORECASTING ICON SENSITIVITY SETTING: Digit flashing Icons flashing For locations with rapid changes of weather conditions, the weather icons can be set to a different level for faster display of weather conditions. There are 3 levels of setting: 1, 2 and 3; level 1 is the most sensitive setting; level 3 is the slowest recording setting (default setting is "2"). Confirm with the SET key and exit the Manual settings. ALARM SETTING: Alarm time Alarm icons The alarm time can be set when pressing the ALARM 1 or ALARM 2 key. Confirm with the ALARM 1, ALARM 2, or Snooze key and exit the Alarm setting. The alarm setting can be activated or deactivated manually by pressing the ALARM 1 or ALARM 2 key, depending on which one is activated. The alarm icon will be displayed on the LCD if the setting is activated. SNOOZE ACTIVATION AND STOPPING THE ALARM: The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the snooze will only be activated when the snooze time is set other than OFF in snooze setting. When the alarm is snoozing, the alarm icon ((1)) or ((2)) will start flashing indicating that the alarm is active but is in Snooze mode. [. . . ] No part of this manual may be reproduced without written consent of the manufacturer. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]