User manual LA CROSSE TECHNOLOGY WS-9031

[. . . ] WS-9031U Quick Set-up instructions 1) 2) Insert two AA batteries into the remote transmitter. Insert three AA batteries into the Weather Projection Station and/or plug into wall. Note: When starting or restarting your weather projection station the transmitter should be started first and then your weather projection station. After power is supplied (either battery or AC) ensure that no buttons are pressed for 15 minutes. [. . . ] Time reception icon (for WWVB time) Time Moon phase icon Calendar display Alarm time Alarm icon Weather tendency indicator Weather forecast icon U. S. time zone map Indoor temperature in ºF/ ºC Outdoor temperature in ºF/ ºC Comfort indicator icon Indoor relative humidity in RH% Outdoor data signal reception indicator Outdoor relative humidity in RH% MANUAL SETTINGS: The following manual settings can be changed when pressing the SET key for: · LCD contrast setting · Time zone setting · DST (Daylight Saving Time) setting · Time reception ON/OFF setting · 12/24-Hour setting · Manual time setting · Calendar setting · Snooze setting · °F/°C setting · Weather forecasting icon sensitivity setting LCD CONTRAST SETTING: Last digit flashing The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting is LCD 5): 1. Time zone map Flashing TIME ZONE SETTING: The time zone default of the Weather Projection Station is EST ­5. The range runs from 0 to -12 and then runs from +12 back to 0 in consecutive 1-hour intervals. time zone map available for ­5hr(EST), 6hr(CST), -7hr(MST) and ­8hr(PST) zones. Confirm with the SET key and enter the DST (Daylight Saving Time) setting. DST (DAYLIGHT SAVING TIME) SETTING: Flashing Note: The DST default is "ON", meaning that the received time will automatically be adjusted according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST "OFF". Confirm with the SET key and enter the Time Reception ON/OFF setting. TIME RECEPTION ON/OFF SETTING: Digits flashing In area where reception of the WWVB time is not possible, the WWVB time reception function can be turn OFF. Note: If the Time Reception function is turned OFF manually, the clock will not attempt any reception of the WWVB time as long as the Time Reception OFF function is activated. The Time Reception and the "WWVB" icons will not be displayed on the LCD. 12/24-HOUR SETTING: Flashing The hour display can be selected to show hours in 12-hour or 24-hour settings. Use the CH/+ key to toggle between "12H" or "24H". Confirm with the SET key and enter the Manual time setting. MANUAL TIME SETTING: In case the Weather Projection Station cannot detect the WWVB-signal (for example due to disturbances, transmitting distance, etc. ), the time can be manually set. 5. Note: The unit will still try to receive the signal between 12:00 to 6:00 a. m. every day despite it being manually set and if the WWVB time reception function has been set ON. When it does receive the signal, it will change the manually set time into the received time. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will still be attempted the following hour. CALENDAR SETTING: Date and month (24hr time format) Month and date (12hr time format) Year The date default of the Weather Projection Station is 1. Once the radio-controlled time signals are received, the date is automatically updated. However, if the signals are not received, the date can also be set manually. Press the SET key again to confirm and to enter the date setting mode. Confirm all calendar settings with the SET key and enter the Snooze setting. SNOOZE SETTING: Snooze time The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes): 1. The snooze can also be set OFF when the "OFF" digit is being displayed. Confirm with the SET key and enter the Temperature setting Note: If the snooze time has been set "OFF", the snooze function will not be activated. °F/°C TEMPERATURE SETTING: Digit flashing The temperature display can be selected to show temperature data in °F or °C (Default °F). 1. [. . . ] No part of this manual may be reproduced without written consent of the manufacturer. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]