User manual LA CROSSE TECHNOLOGY WS-8035U

[. . . ] WS-8035 Wireless 433 MHz Wireless Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment About WWVB Quick Set Up Guide Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Overview of Programming Sequence LCD Contrast Setting Time Zone Setting DST ON/OFF Setting Radio-controlled Time ON/OFF Setting 12/24-hour Time Mode Setting Setting the Time/Date Manually Temperature Measuring Units (ºF/ºC) Air Pressure Measuring Units (inHg/hPa) Relative Pressure Setting Forecast Sensitivity Setting Features and Operation Time Alarm Setting and Operation Moon Phase Minimum/Maximum Temperature/Humidity Multiple Remote Temperature/Humidity Sensors Comfort Icon Weather Forecast and Pressure Trend Indicators Weather Icons Weather Tendency Arrows Barometric Air Pressure Reading Air Pressure History Bar Chart Mounting Maintenance and Care Troubleshooting Guide Specifications Warranty Information Page 3 3 4 5 6 7 8 8 8 8-9 9 9 9-10 10-11 11 11 11-12 12 13 14 14-15 15-16 16 16 17 17 18 18 19-20 21 22 23 24-25 2 INVENTORY OF CONTENTS 1. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. One wall-mounting screw (optional) ABOUT WWVB (radio-controlled time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. [. . . ] Press and release the ALM/DATE button to toggle between the alarm time and the day and date. When the alarm time and alarm icon are showing to the right of the moon phase the alarm is activated. When the day and date are showing in the DATE LCD the alarm is deactivated. To deactivate the snooze function press and release any button other than either of the SNOOZE/CH buttons. 3. 13 B. There are 12 moon phases shown on the indoor weather station; the white portion signifies the portion of the moon visible in the sky. The indoor weather station is programmed with all moon phases from the year 2003 until 2029. New Moon Full Moon Small Waxing Crescent Large Waning Gibbous Large Waxing Crescent Small Waning Gibbous First Quarter Small Waxing Gibbous Last Quarter Large Waning Crescent Large Waxing Gibbous Small Waning Crescent C. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "IN" key once to view the indoor maximum temperature and humidity ("MAX" will be displayed above the indoor temperature and humidity). Press and release the "IN" key again to view the indoor minimum temperature and humidity. Press and release the "IN" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the indoor minimum and maximum temperature and humidity, first display the values you wish to reset (minimum or maximum). Next press and hold the "SET" key for at least three seconds. You will see then that the values will reset to the current temperature and humidity and corresponding time. 14 2. Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "OUT/+" key once to view the outdoor maximum temperature and humidity ("MAX" will be displayed above the outdoor temperature and humidity). Press and release the "OUT/+" key again to view the outdoor minimum temperature and humidity. Press and release the "OUT/+" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). Note: To reset the outdoor minimum and maximum temperature and humidity, first display the values you wish to reset (minimum or maximum). Next press and hold the "SET" key for at least three seconds. You will see then that the values will reset to the current temperature and humidity and corresponding time. b. Multiple Remote Temperature Sensors The WS-8035 is able to receive signals from 3 different remote sensors. [. . . ] Thermo Hygro Sensor: 2 x AA (IEC LR6) 1. 5V batteries. Dimensions (H x W x D) Indoor weather station Remote thermo/hygro sensor 10 x 7. 75 x 1 inches (254 x 197 x 25 mm) 4. 29 x 1. 56 x 0. 78 inches (110 x 40 x 20 mm) 23 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. [. . . ]