User manual LA CROSSE TECHNOLOGY WS-8015TWC

[. . . ] WS-8015U Wireless 433 MHz Weather Station with Sun/Moon Time Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/ Additional Equipment Quick Set Up Guide About WWVB Detailed Set Up Guide Battery Installation Start Up Sequence Explanation of LCD Information Function Key Layout Program Mode Time, 12/24 Hour Mode and Date Setting City Location Setting U. S. City Codes Canada City Codes Mexico City Codes Time Zone Setting Daylight Saving Time (DST) Setting Weather Measuring Units LCD Contrast Overview of Programming Sequence Features and Operation Sun Rise/Set and Moon Rise/Set Calculation Moon Phase MINIMUM/MAXIMUM TEMPERATURE/HUMIDITY MULTIPLE REMOTE SENSORS REMOTE TEMPERATURE ALARM COMFORT INDICATOR WEATHER FORECAST ICON AND PRESSURE TREND WEATHER TENDENCY ARROWS STORM WARNING ALARM TWO HOUR AIR PRESSURE TENDENCY CHART BAROMETRIC AIR PRESSURE READING AIR PRESSURE HISTORY BAR CHART MOUNTING MAINTENANCE AND CARE TROUBLESHOOTING GUIDE SPECIFICATIONS WARRANTY INFORMATION Page 3 4 4 5-6 5 6 7 7 8-13 8 8-9 9-11 12 12 12 12-13 13 13 14-20 14-15 15 15-16 16 16-17 17 17-18 18 19 19 19 19-20 21 23 23 24 25 2 INVENTORY OF CONTENTS 1. Instruction manual and warranty card ADDITIONAL EQUIPMENT (not included) 1. One wall-mounting screw (optional) Figure 1. ABOUT WWVB (radio-controlled time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) radio station, WWVB, is located in Ft. [. . . ] Press and release the "SET" key to advance to the month setting. Press and release the "+" or "­" key to select the month desired. Press and release the "SET" key to advance to the date setting. Press and release the "+" or "­" key to select the date desired. Press and release the "SUN/MOON" key to calculate the new city location at the date selected. You may instead press the "SET" key to select a different location, starting at step b above. Once the "SUN/MOON" key is pressed, the sunrise/set and moonrise/set times will flash as dashes while the indoor weather station calculates the times (the moon phase is calculated, also). Once the times are displayed, the indoor weather station will remain in this mode for 30 seconds or until the "CH" key is pressed. Once this mode is exited either through timeout after 30 seconds or by pressing the "CH" button, the indoor weather station will revert to the normal mode with the location and date set through the programming mode. The indoor weather station will default to the last city selected when this mode is entered again. u. 18 B. There are 12 moon phases shown on the indoor weather station; the black portion signifies the portion of the moon visible in the sky. The indoor weather station is programmed with all moon phases from the year 2000 until 2099. 2. The moon phase for any date may be found by selecting a different date through the sun rise/set moon rise/set programming section (section A in Features and Operations). C. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. From the normal display mode, press and release the "IN" key once to view the indoor minimum temperature and humidity ("MIN" will be displayed near the indoor temperature and humidity). Press and release the "IN" key again to view the indoor maximum temperature and humidity. Press and release the "IN" key again to return to the normal mode (timeout of viewing minimum/maximum values will occur if no keys are pressed for fifteen seconds). b. c. Note: To reset the indoor minimum and maximum temperature and humidity, press and hold the "IN" key for at least two seconds. 19 2. Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. The outdoor (remote) minimum and maximum temperature values are displayed below the outdoor temperature display. These values are rounded down for minimum and rounded up for maximum. Note: The temperature alarm mode shares the same display. When the alarm values are displayed, "ALARM" will be displayed above the remote temperature. [. . . ] Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner's manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference. . This warranty covers only actual defects within the product itself, and does not cover 31 the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. [. . . ]