User manual LA CROSSE TECHNOLOGY WS-7014CH

[. . . ] WS-7014U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys 12/24 hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date, and Year Selecting °F or °C Setting the LCD Contrast Features Weather Forecast Icons Indoor Temperature, Humidity, & Comfort Level Indicator Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor, & Resetting) Additional Remote Control Sending Units (Set-Up, Viewing, & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 3-4 4-5 5-6 7 7 7-8 8-9 9-10 10-11 11 11-12 12-13 13 14 14-15 15-17 17-19 20-21 22 23 24 2 INVENTORY OF CONTENTS 1. Instruction Manual and Warranty Card. Figure 1 Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Mounting Bracket TX2U Temperature sensor Figure 2 ADDITIONAL EQUIPMENT (not included) 1. One, Philips screwdriver for mounting. ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout the United States at 60 kHz. [. . . ] Press and hold the SET button for 3 seconds, or until "12h" or "24h" flashes in the DATE LCD. Press and release the SET button 10 more times to reach the LCD contrast setting mode. There are 8 LCD contrast levels to choose from--"Lcd 0" is the lightest, and "Lcd 7" is the darkest. INDOOR TEMPERATURE, HUMIDITY, AND COMFORT LEVEL INDICATOR The current Indoor Temperature (viewed on the left) and Relative Humidity (viewed on the right) are displayed in the INDOOR LCD. The Comfort Level Indicator is located at the center of the INDOOR LCD. The indicator will display a happy face icon when the temperature is between 68°F and 79°F (20°C and 25. 9°C), and the humidity is between 45% and 64%. A sad face icon will be displayed when the temperature and humidity are outside the mentioned ranges. 13 III. OUTDOOR TEMPERATURE The temperature received from the Remote Control Sender is viewed in the OUTDOOR LCD. When there is more than one Remote Control Sender unit in operation, a "boxed" number will appear to the right of the temperature. This indicates which Remote Control Sender unit (1, 2, or 3) is currently displaying its data in the OUTDOOR LCD. (This feature is explained in further detail in section VI--Adding Outdoor Remote Control Senders). MINIMUM AND MAXIMUM TEMPERATURE RECORDS The WS-7014U keeps a record of the MINIMUM and MAXIMUM temperature, and the time and date of their occurrence--for both the indoor and outdoor modes. "MIN" appears in the upper-center location of the flashing INDOOR LCD, indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. Press the IN button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper-center location of the flashing INDOOR LCD, indicating that the maximum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. While "MAX" is still displayed press the IN button again to return to the current data display. Or you can wait 20 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. 2. 3. B. VIEWING THE OUTDOOR TEMPERATURE RECORDS 14 1. 2. 3. Press the OUT button once. "MIN" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the minimum temperature, and the time and date of occurrence are displayed. Press the OUT button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the OUT button again to return to the current data display. [. . . ] Do not use solvents or scouring agents; they may mark the displays and casings. Immediately remove all low powered batteries to avoid leakage and damage. Contact La Crosse Technology for repairs. 21 SPECIFICATIONS Temperature measuring range: Indoor: 32°F to 139. 8°F with 0. 2°F resolution. Indoor relative humidity measuring range: Indoor Temperature checking interval: Indoor Humidity checking interval: Outdoor Temperature checking interval (Remote Control Sender): Outdoor Temperature reception (Weather Station): Transmission Range: Power Supply: Weather Station: Temperature Sensor: Battery life cycle: Recommended battery type: Dimensions (L x W x H) Weather Station (without stand): Temperature Sensor: 19% to 95% with 1% resolution. [. . . ]