User manual KOMPERNASS FLORABEST KH 3127 PRC 9.6 CORDLESS BRANCH CUTTER

[. . . ] If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Cordless branch cutter 1 Starting lock 2 Charging socket 3 Handle 4 On / Off switch 5 Ventilation grate 6 Screw 7 Saw blade 8 Branch holder 9 Saw blade cover 10 Edge guide Battery charger (see Fig. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. [. . . ] Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Accidents can happen if you carry the device with your finger on the switch. D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. By doing this you will be in a better position to control the device, especially in unforeseen circumstances. Loose clothing, jewellery or long hair can become trapped in moving parts. J Check the condition of the device, charger 11 , lead 12 and plug 13 before starting to charge the device. [. . . ] Use a dry cloth to clean the outside of the device - never use petrol, solvents or cleaners. Always cut in such a way that the guiding edge 10 is resting on the branch (see Fig. Make sure that the markings showing the direction of rotation on the new saw blade 7 and on the saw blade cover 9 point in the same direction (see Figs. [. . . ]