User manual KARCHER PUZZI 400 K

[. . . ] Check the object to be cleaned prior to using the appliance in an inconspicuous place for colour fastness and water resistance. Illustration  Use the lever on the bender to spray on detergent solution. 13 Operating field Illustration 1 Heating switch 2 Switch for spraying 3 Switch for vacuuming 4 Temperature controller EN – 2 Note: The suction air flow is interrupted by the float if the wastewater container is full. σ If the dirt water reservoir is full, switch off the suction and spray switches. [. . . ] σ Remove the wastewater container from the appliance and empty it or drain it via the drain hose. € – – Cleaning methods Normal soiling  Spray and suction off detergent solution in one work cycle. Note: Repeated suctioning without spraying will shorten the drying time. € – Strong soiling or stains  Apply detergent solution with suction turbine turned off and soak for 10 to 15 minutes. σ In order to further improve the cleaning result, the surface can be recleaned using clear, warm water. € – – Upholstery cleaning  Attach hand nozzle instead of the floor nozzle. σ With sensitive materials, use less detergent and spray the surface at a distance of approx. Highly soiled spots should be presoaked and the detergent solution should soak 5 to 10 minutes. Always work from the light to the shade (from the window to the door). The more sensitive the surface (oriental rugs, berbers, upholstery material) the lower the cleaning solution concentration should be. Rugs with jute backing can shrink if too much water is used and can bleed colours. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. σ Move the pump several revolutions in a clockwise direction using a screwdriver. Accessories and Spare Parts – Heater not working  Fill up fresh water reservoir. € Insufficient vacuum performance  Check the correct positioning of the lid. € Only use accessories and spare parts which have been approved by the manufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be operated safely and trouble free. At the end of the operating instructions you will find a selected list of spare parts that are often required. For additional information about spare parts, please go to the Service section at www. Swimmer is interrupting the suction air flow  Empty the wastewater reservoir. σ Prevent foam generation when adding detergent RM 761 to the wastewater container. [. . . ] Swimmer is interrupting the suction air flow  Empty the wastewater reservoir. σ Prevent foam generation when adding detergent RM 761 to the wastewater container. 16 EN – 5 EC Declaration of Conformity We hereby declare that the machine described below complies with the relevant basic safety and health requirements of the EU Directives, both in its basic design and construction as well as in the version put into circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval. [. . . ]