User manual KARCHER K4 PREMIUM

[. . . ] Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Please dispose your old appliances using appropriate collection systems. The extraction of water from public waters is prohibited in some countries. [. . . ] 21 Spray lance with Dirtblaster For strong contaminations ———————————————– Optional accessories 22 Washing brush Suitable for use with detergents. 24 Foam nozzle with detergent container With powerful foam for effortless cleaning. Before Startup Attaching the Accessories Illustrations on fold-out page!Install the storage for trigger gun Illustration  Place the bottom holder into the recesses and push forward until it audibly locks in. Install the storage hook for the mains connection cable Illustration  Press in the storage hook and lock it into the top position. Install the transport handle You will need the 2 included screws as well as a Phillips screwdriver PH 2. Illustration  Slide the transport handle into the guide and secure it with 2 screws. EN – 8 Install the dosage regulator for detergent You will need the 2 included screws as well as a Phillips screwdriver PH 2. Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing. σ Insert the hose drum into the intakes on the transport handle. σ Press the connecting fitting from the short high pressure hose into the brass intake, secure with clamps. Water supply from mains ṇ Warning According to applicable regulations, the appliance must never be used on the drinking water net without a system separator. A suitable system separator by KÄRCHER or alternatively a system separator according to EN 12729 type BA must be used. Water that has flown through a system separator is no longer classified as drinking water. Caution Always connect the system separator to the water supply, never directly to the appliance!Illustration  Screw the coupling element to the water connection on the appliance. Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with backflow valve (Optional accessory, order no. σ Screw the suction hose into the water connection of the appliance and insert it into the water source (e. Start up Caution Dry running of more than 2 minutes leads to damage of the high-pressure pump. If the appliance does not build up pressure within 2 minutes, switch the appliance off and proceed in accordance with the instructions in Chapter "Troubleshooting". σ Attach the water supply hose to the coupling on the water connection. 19 Water supply Caution Impurities in the water can damage the high-pressure pump and the accessories. [. . . ] Technical specifications Electrical connection Voltage 230 V 1~50 Hz 1, 8 kW IP X5 I 10 A Spare parts Use only original KÄRCHER spare parts. You will find a list of spare parts at the end of these operating instructions. Warranty The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. [. . . ]