User manual KARCHER K 4600

[. . . ] : +49 7195 14-0 Fax: +49 7195 14-2212 DE - 9 9 Contents General information Safety instructions Operation Description of the Appliance Transport Storage Maintenance and care Troubleshooting Helpline Technical specifications CE Declaration EN -1 EN -2 EN -3 EN -3 EN -7 EN -7 EN -7 EN -8 EN -8 EN -9 EN -9 Notes about the ingredients (REACH) You will find current information about the ingredients at: http://www. Htm Warranty The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. [. . . ] Lock trigger gun This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance. Overflow valve with pressure switch The overflow valve prevents the permissible working pressure from being exceeded. Install the dosage regulator for detergent You will need the 2 included screws as well as a Philips screwdriver PH 2. Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing. Special accessories Special accessories expand the possibilities of using your appliance. Before Startup Mount loose parts delivered with appliance prior to start-up. Water supply ṇ Warning According to the applicable regulations, the appliance must never be used on the drinking water supply without a system separator. Note: Impurities in the water can damage the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. Install wheels Illustration Push the wheels into the intake and secure with the enclosed plugs, watch for positioning of plug. Install the storage for hand-spray gun Illustration Place the bottom holder into the recesses and push forward until it audibly lcoks in. Install the storage hook for the mains connection cable Illustration Press in the storage hook and lock it into the top position. Illustration Screw the coupling element (supplied) to the water connection on the appliance. Push the water supply hose onto the coupling unit, then connect it to the water supply. Operation ṇ Danger The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly. Caution Prior to cleaning, make sure that the high pressure is placed safely on level ground. Wear protective goggles and protective clothing during the cleaning process. Note: Release the lever of the trigger gun; the device will switch off again. Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with backflow valve (Optional accessory, order no. Fill the KÄRCHER suction hose with backflow valve with water, screw to water supply and hang into the water butt. Separate the high pressure hose from the high pressure connection of the appliance. [. . . ] appliance is leaking Slight leakage from the appliance pump is normal. Check whether the detergent reservoir is placed into the detergent connection facing down. ƽ Danger Turn off the appliance and remove the mains plug prior to any care and maintenance work. Repair works may only be performed by the authorized customer service. [. . . ]