User manual KARCHER K 3.65 M

[. . . ] The appliance must not be used if the power cord or important parts of the appliance, e. If the power cord is damaged, please arrange for it to be replaced immediately by an authorised repair agent or a skilled electrician Check the high-pressure hose for damage before every use. please arrange for the immediate replacement of a damaged high-pressure hose. The appliance may not be used in areas where a risk of explosion is present. [. . . ] Safety Devices Caution Safety devices protect the user and must not be modified or bypassed. power switch The appliance switch prevents unintentional operation of the appliance. Lock trigger gun This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance. Overflow valve with pressure switch The overflow valve prevents the permissible working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the highpressure jet ist stopped. Special accessories Special accessories expand the possibilities of using your appliance. Before Startup Illustration Mount loose parts delivered with appliance prior to start-up. Illustration Push the high pressure hose into the trigger gun until it locks audibly. Water supply According to the applicable regulations, the appliance must never be used on the drinking water supply without a system separator. For protection, the use of the KÄRCHER water filter (optional accessory, order no. Use a fibre-reinforced water hose (not included) with a standard coupling. Push the water supply hose onto the coupling unit, then connect it to the water supply. Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with backflow valve (Optional accessory, order no. Description of the Appliance When unpacking the product, make sure that no accessories are missing and that none of the package contents have been damaged. Illustrations on Page 2 1 Connection for water supply with filter 2 Coupling element for water connection 3 High pressure connection 4 Appliance switch "0/OFF"/ , , I/ON" 5 Detergent Tank 6 Suction hose for detergent 7 Storage for trigger gun 8 Transport handle 9 Storage for accessories 10 Hose drum 11 Mains cable with mains plug 12 Trigger gun 13 Lock trigger gun 14 High pressure hose 15 Spray lance with pressure regulation (Vario Power) 16 Spray lance with Dirtblaster Fill the KÄRCHER suction hose with backflow valve with water, screw to water supply and hang into he water butt. Separate the high pressure hose from the high pressure connection of the appliance. Of 2 minutes and wait until the water exits the high-pressure connection without bubbles. Start up Caution Dry runs lasting longer than two minutes lead to damages to the high pressure pump. If the appliance does not build up pressure within two minutes, switch it off and proceed as instructed in the Chapter "Help with faults". Illustration Connect the high pressure hose to the high pressure connection of the appliance. [. . . ] In the winter: Completely drain all water from the appliance: Switch the appliance on with detached high-pressure hose and detached water supply (max. 1 minute) and wait, until no more water exits at the high-pressure connection. Remove filter from suction hose for detergent and clean under running water. Pull out the sieve in the water connection using flat-nose pliers and clean under running water. [. . . ]