User manual KARCHER BR 40 10 C ADV

[. . . ] 1 1 1 1 2 2 2 4 4 4 4 6 7 7 7 7 Proper use Use this appliance only as directed in these operating instructions. € The appliance may only be used for the cleaning of hard surfaces that are not sensitive to moisture and polishing operations. € The appliance may only be equipped with original accessories and spare parts. € The appliance has been designed for the cleaning of floors inside or covered surfaces. [. . . ] When cleaning close to a wall, position the appliance so that the deflection rollers point towards the wall. σ If the detergent solution is to be vacuumed off after the cleaning process: Check that all vacuum bars are inserted into the appliance Press the pedal to lower the vacuum bar. σ Turn on the brush irrigation by using the switch for the detergent solution. σ Swivel the slider toward the operator the chassis is retracted and the brushes touch the floor. σ Move the appliance over the surface to be processed by the slider. Polishing  Remove both vacuum bars from the appliance (see chapter "Maintenance tasks/replacing vacuum bar"). σ Swivel the slider toward the operator the chassis is retracted and the brushes touch the floor. σ Move the appliance over the surface to be processed by the slider. The highest allowed net impedance at the electrical connection EN -3 12 Note To polish underneath furniture, the fresh water and wastewater reservoirs can be removed. σ Unscrew the star grips, remove the screws and take off the upper push handle half. Shutting Down the Appliance  Release the switch for detergent solution. σ Push the appliance forward for another 1-2 m to draw off residual water. When switching off the appliance, take the load off the appliance by placing the slider vertically. σ Press the push-button for the vacuum bar change toward the inside - the vacuum bar will release. maintenance and care ƽ Danger Risk of electric shock , risk of injury!Pull the plug from the mains before carrying out any tasks on the appliance. Drain out dirt water and the remaining free water before wokring at the machine. Do not wash down the appliance with water and do not use aggressive detergents. σ Fill the fresh water tank with clear water and rinse the appliance to avoid residue buildup. σ Check the seal in the ball valve in the fresh water reservoir. σ Let the reservoirs dry prior to closing them to prevent odor creation. σ Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent. [. . . ] Spare parts – – – Only use accessories and spare parts which have been approved by the manufacturer. The exclusive use of original accessories and original spare parts ensures that the appliance can be operated safely and trouble free. At the end of the operating instructions you will find a selected list of spare parts that are often required. For additional information about spare parts, please go to the Service section at www. [. . . ]