User manual IOGEAR MINIVIEW GCV160

[. . . ] TM IOGEAR 16560 Aston Street Irvine, CA 92606 Phone: (949) 250-1260 Toll Free: (888) 999-2836 Fax: (949) 250-1262 www. iogear. com info@iogear. com ©1999 ATEN Technology, Inc. Microsoft and Windows 98 are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc. [. . . ] Full Macintosh keyboard functionality is supported on any PS/2 keyboard, while a second ADB port allows your existing ADB devices to be used with the Mac. Although this unit is fully compatible with our PS/2 KVM switches, it can also be used as a stand-alone Mac-PS/2 converter. We hope you enjoy using your new Macintosh Adapter ­ yet another first-rate connectivity solution from IOGEAR. 1 Features / System Requirements Features Converts from ADB and DB-15 to PS/2 and HDB-15 Allows a Macintosh system to be incorporated into your KVM setup. Secondary ADB port provides support for additional Macintosh accessories. Full Mac functionality supported on a PS/2 keyboard No software required. Patented VSE technology supports ultra high quality video at resolutions up to 1920 x 1440. System Requirements 1) Macintosh computer with: ADB connectors for the mouse & keyboard DB-15 connectors for the video (standard Mac Video) A PS/2 mouse A PS/2 or AT keyboard A VGA, SVGA or MultiSync monitor 2) 3) 4) 2 Installation Installation in a KVM setup: Before installing your G-CV160, please make sure your Macintosh is powered OFF. 1) Connect the PC keyboard and mouse ports on the G-CV160 to one of the PC ports on your KVM switch. Be sure the keyboard port on the KVM switch is connected to the keyboard port on the G-CV160, and the same is true for the mouse ports. If you have an older Macintosh with DB-15 (Mac video) connectors, connect the PC video port on the G-CV160 to the corresponding video port on your KVM switch. If you're connecting the G-CV160 to a new G3, G4 or other Macintosh with HDB-15 video connectors, you can bypass the video portion of the G-CV160 and connect the video port on your KVM switch directly to the Mac. If you have any extra ADB devices (beside the typical mouse and keyboard), connect them to the 2nd ADB port on the side of the G-CV160. 2) 3) 4) 3 Installation Before installing your G-CV160, please make sure your Macintosh is powered OFF. If you have an older Macintosh with DB-15 (Mac video) connectors, connect your monitor to the PC video port on the GCV160. If you're connecting the G-CV160 to a new G3, G4 or other Macintosh with HDB-15 video connectors, you can bypass the video portion of the G-CV160 and connect the monitor switch directly to your Mac. If you have any extra ADB devices (besides the typical mouse and keyboard), connect them to the 2nd ADB port on the side of the G-CV160. 3. 4. 4 Installation 5 Dip Switches Note: Do not modify the DIP Switches when your Macintosh is powered-ON. [. . . ] The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims it's quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the right to revise or update the device or documentation without obligation to 10 Contacting IOGEAR In the event that your MiniViewTM fails to function properly, or you wish to contact us for any other reason, here are a few ways to contact us. IOGEAR 16560 Aston Street Irvine, CA 92606 Phone: (949) 250-1260 Toll Free: (888) 999-2836 Fax: (949) 250-1262 www. iogear. com info@iogear. com 11 [. . . ]