User manual HYUNDAI HL770-7A BROCHURE

[. . . ] Easy-to-read gauges on the instrument panel in front provide constant and accurate information. I Photo may include optional equipment. 4 HL770-7A_new_en 21-08-2007 08:50 Pagina 5 Control Center The all-new, deluxe operating space was engineered with 3-D modelling to optimize your ultimate control centre. The wide, tinted and laminated front windshield has no framing cutting through to ensure excellent visibility. Adjustable steering column The Air Conditioning and Heating System The operator can easily control the temperature and air flow. The defroster on the front windshield and rear window makes it convenient for winter working usage. 40 FNR Switch on Joystick Control Lever A forward/neutral/reverse travel switch can be installed on top of it for operators convenience. [. . . ] For each gear change, the control unit performs a monitoring function to ensure that the specified shift curve is adhered to, and readjusts the shift pressure applied to the clutches accordingly. This result in smooth gearshifts under load without traction interrupts. It also prevents standstills, sudden load changes or torque peaks during operations such as steep hill driving with full load. In addition, there is the option for the driver to make manual gearshifts. 7 HL770-7A_new_en 04-06-2009 14:41 Pagina 8 Accessible and Serviceable New Generation, Innovative Solution in Earth Moving, the HL770-7A Accessible grease fittings Grease fittings are highlighted and available around the machine for fast access when doing your service checks. Simple air filter replacements The air cleaner is easily replaceable by turning the wing nut on the outer shell counter-clockwise. Open pin access You can quicker remove or tighten your front attachment pin (chromated) with this open connector system. Remote type drain port It is now easier to change your engine oil, coolant and hydraulic oil with the remote drain port. 8 HL770-7A_new_en 21-08-2007 08:50 Pagina 9 An ideal arrangement of components ensures quick and convenient maintenance. Highly accessible engine compartment assures fast and efficient repairs when necessary. Hydraulic tank The hydraulic tank is located behind the cab to facilitate the accessibility of hydraulic hoses and pipes. Oil sight gauge A sight gauge is installed on the side of the hydraulic tank for convenient ground level check out. Transmission oil port The transmission oil change port is openly accessible. It comes with an anti-vandalism lock for machine protection. Central electric controllers & Fuse Box Electric controllers and a concentrated fuse box are centralized to improve serviceability. Cabin Air Fresh Filter The internal pressure is maintained slightly higher than the outside to exclude dust from entering in and reduce noise levels to the cabin. Coolant Sight Gauge A coolant sight gauge is installed on the top of the radiator for convenient checks of coolant level. Easy Access to All Engine Components Here you find the engine oil check, main and pre-filters (fuel, oil, coolant). The large engine-sidepanels permit easy and safe access for inspections. The filters can be screwed on and off for quick replacements. Up-to-date hydraulic remote cooling fan Minimum fuel consumption and low noise is realized by using a hydraulic cooling fan sensing coolant temperature, intake air temperature, transmission oil temperature and hydraulic oil temperature. Reversible cooling fan is installed. 9 HL770-7A_new_en 05-11-2007 16:34 Pagina 10 Specification Engine Maker/Model Type CUMMINS QSL 4-cycle, turbocharged, charge air-cooled direct injection, electronic controlled diesel engine Bore x Stroke Displacement Compression ratio Air cleaner Gross power Net power Maximum power Maximum torque No. of cylinders 209 kW (280 HP) at 2, 000 rpm 198 kW (266 HP) at 2, 000 rpm 231 kW (310 HP) at 1, 700 rpm 1, 480 Nm (1, 070 lbf. ft) at 1, 400 rpm 6 Alternator Battery Starting motor 114 mm (4. 5") x 145 mm (5. 7") 8. 9 litre (543 cu in) 17. 8 : 1 Dry, dual elements 24 V, 70 Amp 2 x 12 V, 160 Ah. 24 V, 7. 5 kW * Net power output of standard engine as installed in this vehicle(per SAE J1349) complete with fan, air cleaner, alternator, water pump, lubricating oil pump and fuel pump. No derating for continuous operating required up to 1829 m (6, 000 ft). This engine meets the EPA(Tier III-A) / EU(Stage III-A) Emission regulation. Transmission Torque converter type Stall torque ratio 3-elements, single-stage single-phase 2. 985 :1 Travel speed Forward 1st 2nd 3rd 4th Reverse 1st 2nd 3rd km/h (mph) 7. 3 (4. 7) 12. 1 (8. 0) 25. 7 (14. 7) 36. 7 (22. 6) 7. 3 (5. 0) 12. 1 (8. 4) 25. 7 (15. 3) * Full automatic power shift, countershaft type with soft-shift in range and direction. Properly matched torque converter to engine and transmission for excellent working ability. Axles Drive system Mount Four-wheel drive system Rigid front axle and oscillating rear axle Hub reduction Differential Reduction ratio Rear axle oscillation +/-13° (total 26°) Planetary reduction at wheel end Differentials, limited slip (front/rear) 24. 685 Hydraulic System Type Open-centered, tandem circuit system. Bucket Controls Type Pilot operated lift and tilt circuit, single-lever (joystick) control standard. of cylinders-bore x stroke; Lift 2-180 mm (7. 1") x 765 mm (30. 1") Tilt 1-200 mm (7. 9") x 570 mm (22. 4") Raise: 5. 5 sec (with load) Dump: 1. 3 sec Lower: 2. 8 sec (empty) Total: 9. 6 sec Pump Vane type, 425 liters/min (108. 6 gal/min)@governed rpm Two function valve with single or two lever control: Optional third-function valve with auxiliary lever. 20, 5 MPa (2990 psi) Pilot oil pressure is generated by the pilot oil supply unit. Cylinder Lift Circuit Control Valve Tilt Circuit Relief Valve Setting Pilot System Type Relief Valve Setting 2, 9 MPa (427 psi) Cycle Time 10 HL770-7A_new_en 05-11-2007 16:34 Pagina 11 Specification Brakes Service Brakes Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. [. . . ] transmission High lift arrangement with additional counterweight, 505 kg (1110 lb) Hydraulic control, 2 levers Hydraulic control, 3 levers Hydraulic arrangement 3-valve Lighting, auxiliary, 4 on roof Mud guard Open Canopy (None-ROPS) Operator suit Rear view mirrors heated (2 outside) Seat . 2" static seat belt & adjustable mechanical suspension (vinyl) . 3" retractable seat belt & adjustable air suspension Tires : . [. . . ]