User manual HP MINI 1101 SERVICE MANUAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP MINI 1101. We hope that this HP MINI 1101 user guide will be useful to you.


HP MINI 1101 SERVICE MANUAL: Download the complete user guide (4310 Ko)

Manual abstract: user guide HP MINI 1101SERVICE MANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 Maintenance and Service Guide © Copyright 2009 Hewlett-Packard Development Company, L. P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] (The edge of the module opposite the slot rises away from the device. ) Disconnect the wireless antenna cables (2) from the terminals on the WLAN module. Remove the WLAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WLAN module. 52 Chapter 4 Removal and replacement procedures WWAN module NOTE: Not available for computers with Mobile Mi installed. Spare part number 483377-002 483377-003 571888-001 Description HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) WWAN module for use only in China CAUTION: The WWAN module and the WLAN module are not interchangeable. To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the device by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. Keyboard (see Keyboard on page 40) Hard drive or solid-state drive (see Mass storage devices on page 45) Top cover (see Top cover on page 48) Remove the WWAN module: 1. Remove the 2 Phillips PM2. 0×4. 0 screws (1) that secure the WWAN connector module (3) to the system board. (The edge of the module opposite the slot rises away from the device. ) Disconnect the wireless antenna cables (2) from the terminals on the WWAN module. NOTE: The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The blue WWAN antenna cable is connected to the WWAN module "Aux" terminal. Component replacement procedures 53 3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WWAN module. 54 Chapter 4 Removal and replacement procedures USB/audio board Description USB/audio board (includes cable) Spare part number 537614-001 Before removing the USB/audio board, follow these steps: 1. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. If your device has WWAN capability, remove the SIM (see SIM on page 37. Hard drive or solid-state drive (see Mass storage devices on page 45). Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect the cable (2). Release the USB/audio board from the clip attached to the base enclosure (3), and remove the USB/audio board (4). Reverse this procedure to install the USB/audio board. Component replacement procedures 55 Power/battery pass-through board Description Power/battery passthrough board Spare part number 537615-001 Before removing the power/battery pass-through board, follow these steps: 1. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. If your device has WWAN capability, remove the SIM (see SIM on page 37. Keyboard (see Keyboard on page 40) Hard drive or solid-state drive (see Mass storage devices on page 45) Top cover (see Top cover on page 48) Remove the power/battery pass-through board: 1. Remove the 2 Phillips BP2. 5×5. 0 screws (2) that secure the power/battery passthrough board to the base enclosure. Remove the power/battery pass-through board (3). Reverse this procedure to install the power/battery pass-through board. 56 Chapter 4 Removal and replacement procedures Fan Description Fan Spare part number 537613-001 NOTE: To properly ventilate the device, allow at least a 7. 6-cm (3-inch) clearance on the left side of the device. [. . . ] Follow the local laws and regulations in your area for computer battery disposal. Display WARNING!Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP MINI 1101




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP MINI 1101 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.