User manual HITACHI POWER TOOLS PHU45 ELECTRIC TOOL PARTS LIST,0

[. . . ] USE OF NON-HITACHI POWER TOOLS COMPONENTS MAY VOID THE WARRANTY. , The use of dustbags made of paper or a similar material, or dustbags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and may void the warranty, just as with the use of dustbags without the "Original Miele" logo. The "Original Miele" Logo will appear on the packaging or directly on the dustbag. Purchasing new dustbags and filters Original Miele dustbags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele store at www. mieleusa. com. 2 Contents IMPORTANT SAFETY INSTRUCTIONS. 28 How do I change the Active Air Clean or the Active HEPA exhaust filter?35 3 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE Keep these operating instructions in a safe place and pass them on to any future user. WARNINGTo reduce the risk of fire, electric shock or injury: ~ To reduce the risk of electric shock, Before using ~ Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. [. . . ] For more information on the Use and Care of the Powerbrush, see the separate operating instructions. 12 Before using the vacuum cleaner Using the floor brush Always follow the flooring manufacturer's cleaning and care instructions. Connecting the floor brush to the Electro Telescopic wand ^ Fit the Electro Telescopic wand firmly into the floor brush. This is to help prevent overheating and damage to the appliance. 15 Use Rewinding ^ Unplug the power plug from the electrical outlet. If your vacuum cleaner is equipped with an illuminated Park-System, the lighting switches off again automatically approx. ^ Tap the rewind foot switch and the power cord will rewind automatically. 16 Use Turn the vacuum cleaner on and off ^ Press the On/Off foot switch s. The Standby indicator - on the display panel of the vacuum cleaner and the LED - on the Comfort handpiece light yellow. ^ Press – to select a lower power level. ^ Press + to select a higher power level. ^ By pressing the Standby button on the Comfort handpiece the next time the vacuum is used it will turn on to the last selected power level. 17 Use Selecting the suction power You can adjust the suction power to suit the situation. When you reduce the suction power, the floor brush can be moved with less effort. On the Comfort handpiece you will see various symbols that show examples of which power level is recommended for which purpose. # - curtains, lightweight fabrics $ - upholstery, pillows % - thick pile carpets, rugs and runners Auto - Automatic adjustment of the suction power to the floor covering , Do NOT use the "Auto" power level to vacuum curtains or other lightweight fabrics. Excessive suction may cause damage to such items. * - Energy-efficient everyday vacuuming, low noise ( - Low pile carpets ) - Hard flooring and intensive cleaning of carpets ^ To select a higher power setting, press the + button on the Comfort handpiece. ^ To select a lower power setting, press the - button on the Comfort handpiece. 18 Use While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc. , To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece. The marker will indicate that the bag is "full" even when it is not. The filter bag should be changed as the suction power is greatly reduced. This is because the air flow of the filter bag may still be high enough not to activate the marker to show maximum. The filter bag should still be changed. 24 Maintenance and care How to change the filter bag ^ Lift the release button and open the dust compartment lid upwards until it clicks into place. The filter bag has a flap that automatically closes to prevent dust from escaping when the bag is removed. ^ Grasp the finger grip and pull the filter bag out of the holder. ^ Insert the new filter bag into the blue holder as far as it will go. Note: Do NOT unfold the filter bag when you first remove it from the box. ^ Wait until you have inserted the filter bag into the compartment before unfolding it. ^ Now close the dust compartment lid until it clicks into place, taking care not to catch the filter bag in the lid. , If you do not insert a replacement filter bag, the dust compartment lid is designed not to close. Do not use force! 25 Maintenance and care When should I change the dust compartment filter? Whenever you start a new box of Miele filter bag filters, you should change the dust compartment filter. A new dust compartment filter is included in every box of Miele filter bags. Replacing the dust compartment filter ^ Open the dust compartment lid. ^ Open the blue filter frame until it clicks into place, use the clean corner to remove the dust compartment filter. [. . . ] A temperature sensor will turn off the vacuum cleaner if it becomes too warm. This is indicated by a thermal protection indicator § on the display panel of the vacuum. This problem can occur if, for example, an object is blocking the suction hose or the filter bag pores have become clogged with fine dust. The cause could also be a heavily soiled exhaust or dust compartment filter. [. . . ]