User manual HARMAN KARDON MAS 110

[. . . ] MAS 100/ MAS 110 MUSIC SYSTEM OWNER'S MANUAL SAFETY INFORMATION Important Safety Instructions 1. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Set the clock: Press the 7/3 Buttons until "Set Clock" appears on the lower line. Press the Enter Button to display "Set Time". · Set the time: Press the Enter Button and use the Numeric Keys to enter the hour, then the minute. If the 12-hour time format is active, use the 7/3 Buttons to select "AM" or "PM". Press the Enter Button to advance from one field to the next without changing it, and press the Enter Button to save the settings. Turning On the MAS 100/MAS 110 To turn on the MAS 100/MAS 110, press and hold the Power Button on the remote or the controller for 1 second. The system will also turn on when one of the Source Selectors or the Eject Button on the remote is pressed. If the clock has been turned off, the Message Display will go dark to conserve power. Otherwise, the time will be displayed at half-brightness. NOTE: To open a menu or to save new settings press the Enter button. To advance to the next entry field without changing the value, press the Enter Button. To return to the previous menu level without making any changes, press the Back Button. These buttons work the same way in all menus. · Set the format: Press the 7/3 Buttons until "Set 12/24 hour" appears. Press the Enter Button to change the format, and use the 7/3 Buttons to select between the 12- and 24-hour time displays. Set the day of the week: Press the 7/3 Buttons until "Set Day" appears. Press the Enter Button to display the day of the week, and use the 7/3 Buttons to select the desired day. Press the Enter Button to save the changes. Setting the Alarms For automatic turn-on at a programmed time, set one or both of the alarms. Press the 7/3 Buttons until "Alarm Setup" appears in the Message Display. Setting the Clock The clock may be set using the Settings Menu. Press the Settings Button on the remote. Figure 2: Setting the Clock Settings Speaker Setup Right Settings Time Setup > Left < > Enter Back Time Setup Clock Enter Clock Off Right > Left Enter or Back Time Setup Set Clock Right > Left < Time Setup Set Day Enter or Back Set Day Monday Enter Enter Back > > Set Clock Set Time Enter Right > Left < Set Clock Set 12/24 hour > Enter or Back Enter Enter or Back Set Time 12 : 43 > Set 12/24 hour 12 hour > 12 OPERATION 3. Use the 7/3 Buttons Source: Select the source that will play when Alarm 1 or Alarm 2 sounds. The weekday and weekend alarms for each of Alarm 1 and Alarm 2 must use the same source. If you prefer different sources for weekdays and weekends, use Alarm 1 for weekdays only and Alarm 2 for weekends only by adjusting the Weekday On/Off and Weekend On/Off settings appropriately. Use the 7/3 Buttons to select one of these sources: Disc, USB A to display "Alarm 2". When the desired alarm is displayed, press the Enter Button to set it. Use the 7/3 Buttons to display the Weekday Time, Weekend On/ Off, Weekend Time or Source Settings, and press the Enter Button to make a change. You may adjust the Weekday, Weekend and Source settings for either alarm. Weekday On/Off: Select to adjust whether Alarm 1 or Alarm 2 will sound on weekdays. [. . . ] If you have connected a compatible device, such as a portable audio player or a cassette deck, select the corresponding auxiliary input as the source and use the device's own controls. To select one of the analog audio inputs or the phono input, press the Line In Button repeatedly to toggle through the inputs. To select one of the coaxial or optical digital audio inputs, press the Digital In Button repeatedly. TV Input (Analog): Dual rear-panel RCA-type jacks AUX Input (Analog): Dual rear-panel RCA-type jacks Phono Input (Analog): Dual rear-panel RCA-type jacks Line Input (Analog): Front 3. 5mm jack Coaxial 1 Input (Digital): Rear-panel RCA-type jack Coaxial 2 Input (Digital): Rear-panel RCA-type jack Optical 1 Input (Digital): Rear-panel TOSlink® connector Optical 2 Input (Digital): Rear-panel TOSlink connector NOTES: NOTE: 1. Analog audio signals are not converted to digital form, and digital audio signals are not converted to analog audio form. [. . . ]