User manual HARMAN KARDON DVD 21

[. . . ] DVD 21 Digital Versatile Disc Player OWNER'S MANUAL DVD 21 ® Power for the Digital RevolutionTM Table of Contents 3 4 5 6 7 9 10 10 11 12 13 14 15 15 15 16 16 16 16 16 16 16 16 17 17 17 17 18 18 18 18 18 18 19 19 19 19 19 20 20 20 21 21 21 22 22 22 22 23 23 23 24 25 25 25 25 25 25 26 26 26 27 27 28 29 30 31 32 33 Introduction and Terminology Features, Packing List Front Panel Controls Front Panel Information Display Remote Control Rear Panel Connections Setup and Connections to a Stereo TV and Stereo or Pro Logic Amplifier/Receiver to a Dolby Digital/DTS Amplifier/Receiver to a TV or monitor with SCART Connectors Remote Control Digital Audio Connections Playback Basics Basic Play Playback Features System Set-up System Defaults Set-up Menu Navigating Menus Video Menu Video Output SCART Video TV Standard Aspect Ratio Audio Menu Dynamic Range Audio Language Select Other Audio Language Digital Output PCM Limit Player Set-Up Menu Parental Control Password Display Language Menu Language Subtitle Language Status Bar Timeout Panel Dimmer Test Screen Test Screen TV Picture Adjustment with Test Screen Playing DVD Discs Using the Status Bar Selecting a Title/Chapter Using Bookmarks Changing Audio Track Changing Subtitle Language Changing Camera Angle Repeat Play Zoom Playback Information Menus Programmed Play with DVD CD Playback Disc Compatibility To Load and Play an Audio CD Audio CD Playback Features Using the Status Bar Information Menus Selecting a Track Using Bookmarks Selecting the Time Display Repeat Play Random Play Programmed Play with CD MP3 Playback VCD Playback Troubleshooting Guide DVD Language Codes Specifications Declaration of Conformity We, Harman Consumer International 2, Route de Tours 72500 Château-du-Loir, FRANCE declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards: EN 60 065:1993 EN 55 013/A12/8. 1994 EN 55 020/12. 1994 EN 61000-3-2/4. 1995 EN 61000-3-3/1. 1995 Carsten Olesen Harman Kardon Europe 06/02 NOTE: This player is designed and manufactured for compatibility with Region Management Information that is encoded on most DVD discs. This player is designed only for playback of discs with Region Code 2, or for discs that do not contain Region Code information. If there is any other Region Code on a disc, that disc will not play on the DVD 21. 2 2 TABLE OF CONTENTS Introduction & Terminology Thank you for choosing the Harman Kardon DVD 21. The DVD 21 is a multipurpose DVD player, capable of playing both DVD discs and conventional CD audio discs with the highest fidelity and access to future software upgrades via the Internet. [. . . ] The right column now shows the current Subtitle Language setting (highlighted) and the options. With this setting you define your preferred subtitle language (if the disc contains different subtitles). Choosing a subtitle language with the SUBTITLE button on the remote control (see page 8) will change this setting only temporarily. The SUBTITLE button on the remote control can be used to select and change subtitles during playback. If you wish the front panel display to be lit whenever DVD player is on, select Off. If you wish the display to dim in normal play mode and to light up for 5 or 20 seconds only when a button has been pressed on the front or remote, select 5 seconds or 20 seconds as the timeout. The 5 or 20 second timeout interacts with the remote Dimmer button in the following way: If display lighting has been turned off with the Dimmer button, the PANEL DIM will only turn on the green LED's, not the full display. If display lighting has been set to half brightness with the Dimmer button, the display will light up to this level and the LED's to full level. You´ve completed the setup process for your DVD 21 and are about to experience the finest in music and home entertainment. Press SETUP or PLAY on the remote control to exit the setup-menu. Panel Dimmer Select PANEL DIM in the Player Setup Menu, then press ARROW (N ) or ENTER to access the PANEL DIM sub-menu. The right column now shows the current setting (highlighted) and the options. Select the language you prefer for the player's onscreen displays and short messages. This selection does not affect the front panel display. Select another Subtitle Language Other languages for the subtitle can be selected in the same way as described for the "Audio Language" on page 18 by selecting OTHER and entering a four digit code. SYSTEM SETUP 19 Test Screen Test Screen When you press the TEST button on the front panel or on the remote you can activate a still image to test all settings and the video performance of your TV. With the vertical color bars you can test the following: I proper color intensity setting on your TV, I the proper color of each bar, showing if the proper video standard is turned on: the colors should be (left to right): black, white, yellow, cyan (turquoise), green, magenta (purple), red, blue, black. I proper color transition, seen as sharp separation of the bars, S-Video will be better than Video, RGB best of all. I the performance of the color filter in your TV (with "Video" signals), bar edges should show no vertical crawling dots. With the grey scale and the black/white fields below the color bars the brightness and contrast of your screen can be adjusted optimally, see chapter "TV Picture Adjustment" below. TV Picture Adjustment with Test Screen These adjustments may be done now, but you can also make them after setup has been finalized. They can also be made at any time simply by pressing TEST on the remote control or on the front panel. Turn down the color control on your TV until the color bars are visible in black and white. Adjust the contrast to the lowest level where you still can see all bars within the grey scale in the test picture separately and clearly. Adjust the Brightness so that the bars in the grey scale are all visible. The bar furtherst to the left has to be as black as possible rather than grey but the next aside must clearly be differable. All the bars in the grey scale have to be gradually and evenly changing from black to whiter, going from left to right. [. . . ] Note that when red PBC indicator lights up in the front display it is not possible to change track numbers directly. Depending on the disc's functionality, some VCD discs allow the time display to be changed, even when the Playback Control (PBC) is on, as described for CD on page 26 . Playback Control VCD discs made under the Revision 2. 0 specifi-cation will usually offer PBC playback control. Note that the PBC indicator in the front display will turn on automatically with any VCD, when the disc is played. [. . . ]