User manual GEMINI GSS-18 SUB

[. . . ] Congratulations on your purchase of a GSS-SERIES speaker, engineered & manufactured by Gemini Sound Products. [. . . ] When moving this equipment, it should be placed in its original carton and packaging. Make sure your equipment is completely OFF and also lower ALL VOLUME, LEVEL, & GAIN controls and before connecting the speaker. Use a 1/4" SPEAKER or SPEAKONTM CABLE (1) from your AMPLIFIER LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT JACK (3) or SPEAKONTM CABLE INPUT (3). Another way to connect your AMPLIFIER to your speaker is the TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to connect the POSITIVE (-) and NEGATIVE (-) ends of a standard SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4). You can also use the additional 1/4" AUXILIARY or SPEAKONTM OUTPUT JACK (7) to CHAIN-LINK an additional speaker using an additional 1/4" SPEAKER CABLE (8). The speakers can be used in pairs for a NORMAL setup, or in groups of four when CHAIN-LINKED together. Then turn on your AMPLIFIER and increase the VOLUME or GAIN control as recommended by the AMPLIFIERS owner manual. [. . . ] No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products Corp. [. . . ]