User manual GEMINI CX-1000

[. . . ] Figure 3 - Three Way Operation with 180 Hz and 6 kHz Crossover Points Abbildung 3 - Dreiwegebetrieb mit 180 Hz und 6 kHz Frequenzschnitt Figura 3 - Funcionamiento de tres vías con frecuencia de paso de 180 Hz y 6 kHz Figure 3 - Fonctionnement à trois voies à frequences de croisement de 180 Hz et 6 Khz Figure 4 - Two Way Operation with 1 kHz Crossover Point Abbildung 4 - Zweiwegebetrieb mit 1 kHz Frequenzschnitt Figura 4 - Funcionamiento de dos vías con frecuencia de paso de 1 kHz Figure 4 - Fonctionnement à deux voies à fréquence de croisement de 1 kHz Figure 5 - Two Way Operation with 90 Hz Crossover Point Abbildung 5 - Zweiwegebetrieb mit 90 Hz Frequenzschnitt Figura 5 - Funcionamiento de dos vías con frecuencia de paso de 90 Hz Figure 5 - Fonctionnement à deux voies à fréquence de croisement de 90 Hz This state of the art 3-way active electronic crossover network includes the latest features and is backed by a three year warranty. [. . . ] We recommend setting the power amplifiers' volume controls to maximum (highest sensitivity) and then set the crossover's volume controls to the necessary level for proper operation of the complete system (starting from zero and going up). Depending on your system configuration, sometimes applying the ground will create a quieter signal path. Sometimes lifting the ground can eliminate ground loops and hum to create a quieter signal path. With the unit on, listen to the system in idle mode (no signal present) with the ground applied (the GROUND LIFT SWITCH (18) in the left position). Lift the ground by moving the GROUND LIFT SWITCH to the right, turn the power back on and listen to determine which position will provide a signal free of background noise and hum. Keep the GROUND LIFT SWITCH in the ground position if the noise level remains the same in either position. LOW FREQUENCY LEVEL (VOLUME) CONTROL: Use to adjust the output level of low frequency output. Figure 3: Three Way Operation with 180 Hz and 6 kHz Crossover Points Figure 4: Two Way Operation with 1 kHz Crossover Point Figure 5: Two Way Operation with 90 Hz Crossover Point , if you have any problems with this unit, call 1-732-738-9003 for customer service. [. . . ] No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products Corp. [. . . ]