User manual GEMINI CDX-1200

[. . . ] POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. ⷠIf this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. [. . . ] ⷠWhen the product exhibits a distinct change in performance, this indicates a need for service. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. This state of the art 2U professional CD player is backed by a 1 year warranty*. Prior to use, we suggest that you carefully read all the instructions. POWER After you have properly set the VOLTAGE LINE SELECTOR SWITCH you may plug in the power cord of the CDX-1200. lINE OUTPUT JACKS Plug one end of the included RCA cable into LINE OUTPUT JACKS on the rear panel. Plug the other end of the RCA connectors into any available line input jacks on your mixer. If you are connecting the CDX-1200 through a reciever, you can plug the RCA connectors into the CD or AUX INPUT JACKS on your reciever. If there are no CD or AUX INPUTS use any line level (not phono) inputs. - Audio CD, CD-R CD-RW compatible - Anti-shock using RAM buffer memory - 2 Selectable Jog modes Pitch Bend/Search - Instant-start & cue with preview - Single auto-cue/continuous play modes - Seamless loop with reloop - Pitch bend via jog wheel or buttons - Three mode time selection - Frame accurate search - Large blue backlit LCD display - Coaxial RCA digital output - Rubber jog wheels with finger grips - Variable pitch control with a 16% range POWER: Once you have connected all your cables and made sure that the VOLTAGE SELECTION SWITCH is set correctly, you can turn the CDX-1200 on by pressing the POWER button, pressing the CDX-1200's POWER button a second time will turn off the unit. DISC TRAY: The DISC TRAY is where the CD is held during loading, unloading and playback, and holds both 12 cm and 8cm CD's. (DO NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL DAMAGE THE CD MECHANISM, USE THE OPEN AND CLOSE BUTTONS) EJECT BUTTON: Pressing the EJECT BUTTON will open or close the DISC TRAY, unless the CDX-1200 is in play mode, then you must first stop the side you wich to eject. Do not use this CD player at temperatures below 41°F/5°C or higher than 95°F/35°C. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be placed on the apparatus. When disconnecting the power cord from the AC outlet, always grasp it by the plug. To prevent electric shock, do not remove the cover or the bottom screws. JOG WHEEL : In SEARCH MODE the JOG WHEEL can be used to search forward or bacwards in the music track, as well as for fine adjustments to a CUE point in PAUSE mode. In PITCH BEND mode the JOG WHEEL will function the same as the PITCH BEND allowing you to speed up (FORWARD) or slow down (REWIND) the music clockwise bieng (FORWARD) and counter clockwise being (REWIND). DISPLAY: The DISPLAY shows the track number, pitch value, pitch bend, single, continue (for continuous play), play/pause modes, fast forward/reverse modes, loop mode, reloop mode, PGM, repeat modes, the playback display bar, and three diffirent time displays. These times displays are TIME ELAPSED on the track, TIME REMAINING on the disc and and TIME REMAINING on the track. To program a set list into the CDX-1200 memory, begin by stopping the unit from play and pressing PGM to begin the set list. Select a track by using the track selection button to scan to the first track to be placed in the set list. [. . . ] Under normal circumstances your product will spend no more than 10 working days at Gemini. Gemini warrants its products to be free from defects in materials and workmanship for One (1) year from the original purchase date. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by an authorized Gemini Service Center. There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. [. . . ]