User manual FAGOR VP-30C

[. . . ] Unplug the appliance when it is not being used or when you are going to perform a cleaning or maintenance task. â· Keep the appliance out of reach of children or disabled people. â· Do not insert any objects through the protection bars. [. . . ] If it is broken or it has to be substituted, only go to the Technical Assistance Service authorised by the manufacturer. â· The manufacturer will not be responsible for damage which caused by inappropriate or incorrect use or as a result of repairs carried out by unqualified personnel. Before assembly, take the different parts of the fan out of their packaging and check that the power cable is whole and that the appliance has not been damaged during transport. Loosen the bolts (5 and 7) one of which is threaded on to the motor shaft (anticlockwise) and the other on to the engine frame (clockwise) respectively. Assemble the rear grille (4) on the motor frame (1) and fix it with the grille nut (5) guiding it into the positioning plugs (3). Check that the blades do not touch anything when you turn them by hand. Assemble the front grille (8) and press gently until it fits into the plastic ring. With this mode, the fan operates by changing the speed rhythmically, moving from one speed to another every 15~20 seconds approximately, stopping for a few seconds every time a cycle finishes. with this function , the fan will operate differently depending on the chosen speed. At the end of each sequence the fan continues to operate at low speed, independently of the initial speed selected. The fan can be controlled by pressing the buttons on the control panel or using the remote control (Fig. Every time this button is pressed, the selected speed will vary according to the following sequence: low speed (L) medium speed (M) high speed (H) ): Press this button to make the fan swing horizontally. ): Press this button when you wish to select an operation period of 1, 2, 4 or 8 hours. Each time this button is pressed, it moves from one selection to another in the following sequence: ): Press this button to make the fan work in day mode. If the button is pressed again, the function will change to night mode. If the button is pressed for a third time, this function will be deactivated. [. . . ] â· They can also be cleaned with a slightly damp soft cloth. â· The external part of the motor can be cleaned with a slightly damp soft cloth. â· Do not use solvents or abrasive products to clean the fan. [. . . ]