User manual FAGOR SP-1604

[. . . ] SP-1604) Interference suppression: The interference of this appliance has been suppressed in accordance with Interference Suppression Standards. The hair dryer can be dangerous even when it is switched off, and it should therefore be unplugged immediately after use. [. . . ] Read the whole of this manual and keep it for further reference, in order to avoid any damage or hazards arising from incorrect use. If you give the appliance to another person, make sure you give them this manual. Keep packaging material and plastic bags out of the reach of children. Do not use the hair dryer in the bath or shower, in rooms with damp atmospheres or near liquids (above a washbasin or bath filled with water, for example). For greater protection, we recommend you install a 30 mA residual current device in your bathroom. The manufacturer holds no liability for any damages arising from incorrect use or from any use other than that described in this manual, or if any repairs are carried out by non-specialised personnel. SP-1604i Cold air button: The cold air button (d) is for reducing the air temperature during functioning, to allow rapid cooling regardless of the switch position. This button has two working positions: Press the button In this position the button is blocked and does not need to be pressed Ion generator: Model SP-1604i is provided with an ion generator. This function will enhance the shine of your hair and protect it from static electricity. The hairdryer is equipped with a an overload protection system which switches off the appliance if overheating occurs (e. If the hairdryer switches off during use, turn the switch to "0" and wait for 5 minutes approx. Do not use any aerosols or flammable chemical products on your hair. Two accessories are provided with the hairdryer ­ a concentrator nozzle for directing the air flow or drying a specific area, and the diffuser for providing volume. SP-1604 Selecting voltage: This model may be used with a voltage supply of either 120V~ or 230V~. [. . . ] For further information on this matter, consult your local authorities. 0 = Vypnutí 1 = Stedná teplota, slabý proud vzduchu 2 = Vysoká teplota, silný proud vzduchu. [. . . ]