User manual FAGOR PLC-804

[. . . ] Prevent the cable from touching the hot parts of the appliance or hot surfaces. â· Using this appliance produces high temperatures and, therefore, there Prior to using this appliance, read this instruction booklet carefully and keep it in a safe place for future reference. In this way alone will you get the best results and maximum level of safety during usage. Before using the appliance, check that the voltage of your home mains matches that given on the plate located on the base of the boiler. [. . . ] The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Keep electrical appliances out of reach from Children or infirm persons. The user must not leave the iron unattended while it is connected to the supply. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. The plug of the supply cord must be removed from the socket-outlet before the water reservoir is filled with water The filling aperture must not be opened during use. Instructions for the safe refilling of the water reservoir shall be given. WARNING: For your own safety, when you want to iron using steam, before starting to iron, it is necessary to wait until the steam indicator (4) lights up. In the event that this indicator should not light up, do not use the product and contact an authorised after-sales service centre. Remove all of the protective film or labels from the shoe and boiler if there are any. Adjust the "steam level" to the maximum level by turning the steamlevel control (5). Turn the iron's temperature control (9) in a clockwise direction until the maximum The pilot light (6)will light up. The "steam ready" LED indicator (4) will light up when it is ready for steam ironing. The pilot light will turn off when the iron reaches the desired temperature. wARNING: To avoid burns or accidental falls caused by the tube , the appliance has some holders for hooking the cable. These holders are inserted into their respective holes, as shown in figure3. Fill the boiler with tap water (refer to the "Filling the Boiler" section). The "steam ready" LED indicator will light up when it is ready for steam ironing. The pilot light turns off when the iron has reached the desired temperature. If you want to use a constant jet of steam, press the steam lock button (7). Turn the iron's temperature control in an anti-clockwise direction until "Min". [. . . ] Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. To remind you that you must collaborate with a selective collection scheme, the symbol shown appears on the product warning you not to dispose of it in traditional refuse containers. For further information, contact your local authority or the shop where you bought the product. Unplug the appliance and wait until it cools down before proceeding to clean it. [. . . ]