User manual FAGOR IF-800S

[. . . ] Contact your town hall or your retailer for the used appliance collection points closest to your home. In order to avoid interference between your cooking hob and a pacemaker, your pacemaker must be designed and programmed in compliance with the regulations that apply to it. Consequently, we can only guarantee that our own product is compliant. With regard to the compliance of the pacemaker or any potential incompatibility, you can obtain information from the manufacturer or your attending physician. [. . . ] Only glass, terra cotta, aluminium without a special finish on the bottom, copper and some non-magnetic stainless steels do not work with induction cooking. By choosing cookware that displays this logo on its bottom or on its packaging, you can be certain that it is perfectly compatible with your hob under normal operating conditions. To check the suitability of your cookware: Place the vessel on a cooking zone at power level 4. If the display flashes, your cookware cannot be used with induction cooking. If a magnet "sticks" to the bottom of the cookware, it is compatible with induction. If you do not select a power level, the cooking zone will automatically turn itself off. Press the start/stop button for the cooking zone used or the power "-" button until 0 is displayed. Press the + or - power button to adjust the power level from 1 to P (maximum power). When it is switched on you can move directly to maximum power "P" by pressing the "-" button. Use the button to select the cooking zone on which you would like to use the timer. If you press this button several times, a rotating symbol will show which cooking zone the timer is being used for. To use the timer: - turn on the cooking zone - select the rotating symbol for this cooking zone. As soon as you release the button, the power display will show the power of the cooking zone or a "t". When you have finished cooking, the cooking zone turns itself off, the timer shows 0 and a beep sounds. For simultaneous use, favour the use of cooking zones located on opposite sides of the hob. On the same side, the use of a cooking zone at maximum power results in an automatic limitation of the other cooking zone on that side, which is indicated in the power level display. - To use the timer on a different cooking zone, choose a new use by pressing the button several times. When the previous timing stops, set your timing for the new cooking zone using the "+" or "-" buttons. Your cooking hob is equipped with a child safety device that locks its operation after use (e. For safety reasons, the "off" touch control is always active and allows you to shut off a heating zone, even if it is locked. Keep the lock button pressed until the LED above lights up and a "BIP" is heard . - hob locked in use the led above the key lights up The symbol is displayed when you press power or timer buttons on the cooking zone in use . [. . . ] WHAT TO DO Thoroughly moisten the zone to be cleaned with hot water, then wipe off. Use a scraper for glass to remove the large bits, follow with the rough side of a disinfectant sponge, and then wipe off. Apply warm white vinegar to the stain, let stand, then wipe with a soft cloth. Apply a cleaning agent for vitroceramic glass (preferable one with silicone for its protective properties) to the surface. [. . . ]