User manual FAGOR CIV-820

[. . . ] They were prepared for various types/models of appliances therefore you might find in it description of some functions and accesories that do not apply to your appliance. Mounting Instructions Integrated appliances are equipped with instructions for mounting the appliance into the kitchen unit. The appliance should be professionally mounted by qualified technician and instructions are for his use only. We Care for the Environment · Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. · These instructions are printed either on recycled paper or chlorine free bleached paper. · When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. [. . . ] Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment. 10 Instructions for Use Placing and Installation Choosing the Right Place Place the appliance in dry and well ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance. cooker, radiator, water heater and similar devices) and do not expose it to direct sunlight. The appliance should be positioned at least 3 cm away from the electric or gas cooker and at least 30 cm away from the oil or coal stove. Class SN (sub-normal) N (normal) ST (sub-tropical) T (tropical) Ambient temparature from + 10°C to + 32°C from + 16°C to + 32°C from + 16°C to + 38°C from + 16°C to + 43°C Connection to Power Supply Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket). Required nominal voltage and frequency are indicated on the rating plate. The connection to the mains supply and earthing have to be made according to current standards and regulations. Your appliance is compliant with European Directives as well as their modifications. Adjusting the height of the appliance The appliance is equipped with four adjustable legs, so that the height may be adjusted from 82 to 90 cm. The height must be adjusted prior building the appliance into the opening slot, and it should be set at such height that the top panel of the appliance fits exactly below the kitchen worktop (see Mounting Instructions). Description of the Appliance Freezing Compartment (1) is used for freezing fresh foods. Control Panel (3) See Operation Controls Storing Basket (2) is used for storing packages of frozen foods. Instructions for Use 11 Operation Control The freezer is controlled with switches and thermostat button, incorporated in the bottom section of the appliance. Alarm off button and the red signal lamp (3) The sound of the alarm is switched off by pressing the Alarm Off button. The alarm goes off because of high temperature inside the freezer (red signal lamp is on), or because of the excessive dust collected at the condenser (red signal lamp is off). Consult the Section Troubleshooting Guide Control panel Temperature Selection 1 ON/OFF switch (green signal lamp) 2 Continued operation button (yellow signal lamp) 3 Alarm off button (red signal lamp) When the freezer operates automatically, the interior temperature is controlled by the thermostat. The most suitable thermostat position is in the middle between max (7) and min (1). We recommend setting the thermostat on positions towards max (7) only in case you want to accelerate cooling, as for example before loading smaller amounts of fresh foods or when the operation mode shall correspond to the ambient temperature. Thermostat settings towards min (1) help you save energy provided that the freezer is loaded with smaller amount of frozen foods. Changes of the ambient temperature affects temperature in the interior of the appliance. Choose correct setting of the thermostat knob. ON/OFF Switch (1) The appliance is switched on - the green light is on. The appliance is switched off - the green light is off. Continued operation button (2) This switch is used to select one of the two operation modes: continuous and automatic. Continuous operation - the yellow light is on. The cooling system operates continuously. This mode is selected when you want to freeze large amounts of fresh foods and in case you want to deep freeze already frozen foods. Automatic operation - the yellow light is off. The interior temperature is controlled by the thermostat which turns the cooling system on and off. The frequency of switching the cooling system on and off depends on: - the thermostat knob position (thermostat setting), - how often you open the door; and - ambient temperature. Use Starting the empty freezer Switch the freezer on. 12 Storage of frozen food Store the already frozen food in the storage compartment of the freezer. The bottom basin of the appliance is also intended for storage purposes. [. . . ] This is a normal condition and it has no influence whatsoever on the lifetime of the appliance. · After starting the appliance, the operation of the compressor and the refrigerant flow may be louder, which does not mean that something is wrong with the appliance and it has no influence on the lifetime of the appliance. Gradually the noise is reduced. The alarm sounds, red lamp is off Excessive dust on the condenser or around the air circulation openings in the bottom rail may set off the sound alarm. Clean the condenser and the air circulation openings in the bottom rail (consult the Section Cleaning of the Appliance). Cooling system is operating continuously · Continued operation mode is on (yellow lamp is on). [. . . ]