User manual FAGOR BC-350 X

[. . . ] Before using the scales for the first time, read this manual carefully in order to use them correctly and keep them in good condition. Place the scales on a dry, solid surface, making sure they are firmly positioned. [. . . ] Remove the lid from the battery compartment (5) on the underside of the scales and insert the two CR2032 batteries. If the load capacity is exceed, the scales may be damaged and the following warning will appear on the display: Press the button again each time you remove an article, to set the reading to 0 again: NOTE: When you activate the scales for the first time, if no reading appears or if the reading does not stabilise at 0, you can also press the button. When the battery needs replacing, the following message will appear on the display: These scales are a precision instrument. Do not use any sharp objects such as ballpoint pens to press them down. If nothing appears on the screen when you switch on the scales using the button, check the battery is inserted and correctly connected. The use of a soft, dry cloth is recommended for cleaning the outer surface of the scales. When the scales are in use, keep them away from any electromagnetic interference (EMI), i. Remove the battery if the scales are likely to be out of use for some time. Spent batteries must be disposed of in the special containers provided. You can now place any additional articles to be weighed in the container, repeating these last two steps if you wish. [. . . ] To remind you that you must collaborate with a selective collection scheme, the symbol shown appears on the product warning you not to dispose of it in traditional refuse containers. For further information, contact your local authority or the shop where you bought the product. [. . . ]