User manual FAGOR BC-200 2008

[. . . ] Before using the scales for the first time, read this manual carefully in order to use them correctly and keep them in good condition. Place the scales on a flat, solid surface, making sure they are firmly positioned. [. . . ] Press the button again each time you remove an article, to set the reading to 0 again: NOTE: When you activate the scales for the first time, if no reading appears or if the reading does not stabilise at 0, you can also press the button. When the battery needs replacing, the following message will appear on the display: A bell ( ) will appear at the top left of the display. Press the button to confirm the selection and then go on to the next digit. Spent batteries must be disposed of in the special containers provided. If you wish to add further articles, press to set the scales to 0: You can switch it off before it has finished sounding if you wish by pressing any of the buttons. You can now place any additional articles to be weighed in the bowl, repeating these last two steps if you The temperature sensor functions automatically when the scales are switched on. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. To remind you that you must collaborate with a selective collection scheme, the symbol shown appears on the product warning you not to dispose of it in traditional refuse containers. [. . . ] When the scales are in use, keep them away from any electromagnetic interference (EMI), i. Remove the battery if the scales are likely to be out of use for some time. [. . . ]