User manual FAGOR B-800 MAX

[. . . ] Children should be watched to ensure they do not play with the appliance. For greater protection, we recommend installing a residual current device (RCD) with an operational residual current not exceeding 30 mA. This product complies with the European Directives on Electromagnetic Compatibility and Low Voltage. Before using this appliance for the first time, read the following instructions carefully and keep them for future reference. [. . . ] This blender is designed to process small quantities of food and must not be used for any other purpose. the blender is suitable for liquidising carrots and potatoes , and for making milkshakes , pastry , soups , mayonnaise or baby food. Before using it for the first time, clean the body of the motor (4) with a damp cloth. wash the blender leg (5) , the multi-purpose lid (7) , the chopper lid (9) , the chopper jug (10) , the chopping blade (11) and the tapered container (12) in hot soapy water. IMPORTANT: Unplug the appliance before assembling or dismantling any of its parts. The blender is suitable for blending light foods, for example for making sauces, soups, mayonnaise or baby food. Attach the blender leg (5) to the blender body (4) by turning it anti-clockwise until it is securely in place (Fig. Put the food to be blended into a suitable container such as the tapered container provided with the product. Before turning it on, put the blender leg vertically into the ingredients to be processed (Fig. This will prevent the food from spilling out over the edge or splashing. Select the speed by turning the speed regulator (1) from the ­ (minimum) position to the + (maximum) position (Fig. If you think it is necessary, press the Turbo button (3) to blend at maximum speed. Give a better quality when preparing foods and will place less stress on the motor. After one minute of use, switch it off and leave it to rest until it cools down before using it again. chopping function · Use the chopper to chop meat, nuts, herbs, boiled eggs, stale bread, etc. E) and put the ingredients you want to chop into the chopper jug (use table 1 as a guide). Insert the blender body (4) into the blender coupling (8) by turning it anticlockwise until it is securely fixed in place (Fig. Select the speed by turning the speed regulator (1) from the ­ (minimum) position to the + (maximum) position (Fig. If you think it is necessary, press the Turbo button (3) to blend at maximum speed. Once you have finished chopping, extract the blade (11) from the chopper jug before removing the food. [. . . ] If it is very difficult to clean the blade, dismantle the inner blade shaft (11. 1): place the shaft on a flat surface, hold the blade (11) and push it onto the base of the shaft until it clicks into place (Fig. Remember that for the chopping function you must always install the blade with the inner shaft in position. At the end of its working life, the product must not be disposed of as urban waste. [. . . ]