User manual FAGOR AL-350

[. . . ] ⷠThe manufacturer does not accept responsibility for any damage caused by incorrect or inappropriate use, or for repairs carried out by unauthorised personnel. ⷠThis appliance should not be used by physically, sensorially or mentally handicapped people or people without experience or knowledge of it (including children), unless they are supervised or instructed in the use of the appliance by a person responsible for their safety. [. . . ] If the plug provided with the appliance is not compatible with the mains socket, have this substituted by a qualified technician. ) can constitute a safety hazard and should be kept out of the reach of children. ⷠIn case of technical problems, switch off the machine and do not try to repair it yourself. Use only a manufacturer authorised service centre and always demand the use of original spare parts. Failure to comply with above-mentioned conditions could affect the safety of the machine. We recommend that you disconnect the appliance for 1 minute per every 5 minutes of use. To replace the lever, simply repeat the process in reverse, making sure that the groove coincides with the corresponding tongue (fig. When the lever is correctly inserted, simply return it to its usual position. Lower the piecing lever without pressing the ON switch, so that the blade rests on the lid of the tin (fig. You do not need to turn the tin ­ the appliance will do this automatically. ⷠYou do not need to keep pressing down on the lever once the cutting process is underway. ⷠWhen the cutting process is completed, the tin opener will stop automatically as long as you are not pressing down on the piercing lever. [. . . ] For further information, contact your local authority or the shop where you bought the product. : created with pdfFactory Pro trial version www. [. . . ]