User manual FAGOR 3FS-3611

[. . . ] For your washing machine to work properly, the mains water pressure must be between 0. A It is recommended that you have a fixed drainage outlet 50 to 70 cm from the floor. This will reduce the noise level and prevent it from moving during use. The electrical installation, plug, socket, fuses or automatic switch and counter must be correctly dimensioned for the maximum power indicated on the specifications plate. [. . . ] 8 Delicate cold 12 Rinses 14 Normal dry 9 Delicate 30ºC 13 Spin-drying 15 Delicate dry 10 Delicate 40ºC 16 Drain/End 11 Delicate 60ºC We recommend you choose a wash programme without prewash whenever possible. Cotton/Linen delicate colours very light soil Cotton/Linen whites/colours very light soil Cotton/Linen delicate colours light soil Cotton/Linen fast colours light soil Cotton/Linen fast colour medium soil Cotton/Linen whites heavy soil Cotton/Linen whites/fast colours heavy soil Synthetic/mix cotton delicate colours very light soil Synthetic/mix cotton delicate colours light soil Synthetic/mix cotton delicate colours medium soil Synthetic/mix cotton whites/fast colours medium soil Cotton/cotton mix Synthetic/Delicate Wool/wool mix Cotton/cotton mix Synthetic/Delicate Wool/wool mix Cotton/Linen Programme for wash and energy consumption assessment in accordance with standard EN60456, press intensive wash button. Max load of clothes (Kg) Programme description Normal wash, rinses, automatic additive absorption if desired and long final spin SHORT wash, rinses, automatic additive absorption if desired and long final spin NOTE: the KWh and litre consumptions and programme durations may vary depending on the type and amount of clothes, mains water pressure, etc. The wash options must always be selected after choosing the wash programme. Any programme change during selection cancels the previously selected options. A Spin speed selection and anti-crease button The selected programme has its own particular spin speed. D Anti-crease option The wash programme stops on the last rinse, with the clothes left in water. When the function is deactivated, the washing machine continues the programme, draining and spin-drying. It is used, for example, when you are not at home and want to delay the spindrying until you get home, to prevent the clothes creasing after spin-drying and being left in the drum to be removed. Each time the button is pressed the start of washing is delayed by 1 more hour. cancelling the delay To cancel the delay you have to press the clock button successively. The delay will be cancelled when 24 hours have been reached and the button is pressed once more. B By pressing the button several times you can choose between several combinations of one, two and up to three additional functions at the same time depending on the programme selected. Button: Easy-iron ( ) This option prevents garments from creasing by means of carrying out a special programme with special turns to fluff out the garments after spin-drying and make them easier to iron. Button: Extra rinse ( ) Increases the level of the final rinse obtained in the clothes; suitable for large loads and garments belonging to people with sensitive skin. Button: Intensive wash ( ) This option, specially recommended for heavily soiled, stained clothes, achieves better results by extending the normal wash cycle. If during the additional function selection, the programme is changed or the ON/OFF button is pressed, all the functions selected until then are cancelled. Block function selection The lock function ensures that the programme will not be affected if any buttons are pressed. The block function should be activated after the wash programme has been selected together with all its options. Activating the block function a The block function is activated by pressing the start/pause button and holding it down for at least 3 seconds. Deactivating the block function b The block function is cancelled when the wash programme comes to an end. If you want to deactivate the block function before the end of the programme, you have to hold the start button down again for at least 3 seconds. [. . . ] This time is for guidance purposes only and may be affected by the conditions under which the selected programme is being run, e. Initial water temperature, size of load or unbalance caused by the garments during spin drying. When this happens a number of other indicators appear on the display: F05, F06. When your appliance is of no further use, it should not be disposed of together with general domestic waste. [. . . ]