User manual FAGOR 2F2609

[. . . ] In the event of incompatibility between the mains socket and the appliance plug, replace the socket with a suitable one, using a qualified professional. The electrical safety of the appliance is only guaranteed if it is connected to an efficient earth installation, as foreseen in applicable electrical safety regulations. In the event of fault or malfunction where the appliance is not to be used, turn off the appliance and do not attempt to repair. If a repair is required, contact a Technical Assistance Service authorised by the manufacturer and request the use of original spare parts. [. . . ] If a repair is required, contact a Technical Assistance Service authorised by the manufacturer and request the use of original spare parts. if the cable for this appliance is damaged , contact an authorised Technical Assistance Service for it to be replaced. Do not leave the appliance exposed to the elements (rain, sun, ice, etc. Do not use or let any part of the appliance come into contact or near hot surfaces (kitchen gas or electric hobs or ovens). Do not let the cable come into contact with the hot parts of the appliance. Do not use the Breadmaker when empty, as this could cause it serious damage. Do not cover the steam vents and ensure that the ventilation around the Breadmaker is sufficient while running. Add the ingredients into the bread mould (7) as indicated in the recipe from the desired menu (see section "Menu selection" and Recipe tables") use the double spoon (9) and the measuring glass (10) supplied with the product. The order and the measurements indicated should be used for the ingredients as indicated in the recipes to maintain the best results, after the machine has been used a few times, the ingredients can be altered to suit your taste. These recipes are guidelines therefore the quantity of ingredients can be altered to suit to your taste. To detain the process push the "Start/Stop button" (17) again for 2-3 seconds. When the programme ends, the Breadmaker will emit a series of 10 Programme Bread weight oil salt sugar powdered milk flour water powdered yeast Programme Bread weight oil salt sugar flour water powdered yeast Programme Bread weight oil salt brown sugar powdered milk flour brown bread water powdered yeast Programme Bread weight oil salt sugar powdered milk flour water powdered yeast 1. Programme Bread weight oil salt sugar powdered milk flour water (45~60ºC) powdered yeast Programme Bread weight oil salt sugar egg vinegar potato flour soy flour tapioca Xanthan Gum powdered milk Water(43~46ºC) Fast powdered yeast Programme Bread weight oil salt powdered milk sugar flour water powdered yeast Programme Bread weigh oil salt flour water Programme Bread weigh butter salt powdered milk sugar flour water powdered yeast (*) A warning sound can be heard before the end of the kneading cycle to add ingredients. Bread weight First mix Rest Second mix (*) Add dry fruits First yeast Eliminate acidity 2nd yeast Shape 3rd yeast Baking Keep warm Total time 750 g 5m 5m 20 m T. Bread weight Pre-heating First mix Rest Second mix (*)Add dry fruits First yeast Eliminate acidity 2nd yeast Shape 3rd yeast Baking Keep warm Total time 750 g 30 m 5m 5m 15 m T. Bread weight First mix Rest Second mix (*)Add dry fruits First yeast Eliminate acidity 2nd yeast Shape 3rd yeast Baking Keep warm Total time 750 g 5m 5m 20 m T. Bread weight Pre-heating First mix Second mix (*)Add dry fruits First yeast Baking Keep warm Total time Bread weight Pre-heating First mix Rest Second mix (*) Add dry fruits First yeast Eliminat acidity 2nd yeast Shape 3rd yeast Baking Keep warm Total time Memory Retention: The Breadmaker is fitted with a 6-minute protection device against electrical power cuts, should the appliance disconnect accidentally while working. The appliance will continue with the programme if the electricity is connected before six minutes have elapsed. The appliance should be at ambient temperature, if the temperature is too high (>50ºC) or too low (<-10ºC), all the functions will be disabled and the screen will show "E00" or "E01" and it will emit a sound. In this case remove the bread and allow the breadmaker to return to ambient temperature of between -10ºC and 50ºC, and then reconnect. [. . . ] The appliance will continue with the programme if the electricity is connected before six minutes have elapsed. The appliance should be at ambient temperature, if the temperature is too high (>50ºC) or too low (<-10ºC), all the functions will be disabled and the screen will show "E00" or "E01" and it will emit a sound. In this case remove the bread and allow the breadmaker to return to ambient temperature of between -10ºC and 50ºC, and then reconnect. if the device still does not work , contract the nearest Technical Assistance Service. [. . . ]