User manual EPSON WORKFORCE PRO WF-8090 DW NETWORK ADMINISTRATOR'S GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON WORKFORCE PRO WF-8090 DW. We hope that this EPSON WORKFORCE PRO WF-8090 DW user guide will be useful to you.


EPSON WORKFORCE PRO WF-8090 DW NETWORK ADMINISTRATOR'S GUIDE: Download the complete user guide (2043 Ko)

You may also download the following manuals related to this product:

   EPSON WORKFORCE PRO WF-8090 DW NETWORK ADMINISTRATOR'S GUIDE (2101 ko)

Manual abstract: user guide EPSON WORKFORCE PRO WF-8090 DWNETWORK ADMINISTRATOR'S GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] If the instructions are not followed, the setting plate may fall, resulting in personal injury or an accident. Observe the following precautions when handling: • Do not handle the power plug with wet hands. € Do not pull the power cable with too much force when routing the cable through the setting plate. When you mount the projector on the wall with the setting plate, the wall requires enough strength to hold the projector and the setting plate. [. . . ] Place to Install the Setting Plate Carry out the power supply wiring work for the installation location of the setting plate in advance. Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the remote control of the projector. It is recommended to keep connection cable length less than 20 meters to reduce external noise. Install the setting plate in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty. About This Installation Guide This guide describes how to mount the short-throw projector EB-460i/460/450Wi/450W/440W to a wall using the exclusive setting plate. 5 English The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the setting plate. Book Page 6 Friday, November 27, 2009 4:31 PM 1 Package Contents s Page 7 2 Specifications s Page 8 3 Connecting Devices s Page 9 4 Projection Distance Table s Page 10 5 Installation Procedure (1) (2) (3) (4) (5) Install the wall plate on the wall Determine the projection distance and pull out the slider Attach the setting plate to the wall plate Secure the projector to the setting plate Connect the power cable and other cables to the projector s Page 13 6 Adjusting the Projection Screen (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Turn on the projector Change the aspect ratio Display the test pattern Adjust the focus Use the top adjustment dial to adjust the vertical tilt Use the right adjustment dial to adjust the horizontal rotation Use the left adjustment dial to adjust the horizontal roll Adjust the vertical slide Adjust the forward/backward slide Turn off the display of the test pattern s Page 17 7 Attaching the Covers (1) Attach the wall plate cover and end cap (2) Attach the cable cover to the projector s Page 21 6 411825800. Package Contents English Setting plate Wall plate End cap Wall plate cover Template sheet (for installing the wall plate) Hexagon wrenches (for M4, M5, and M8) Shape Name M8 x 15 mm hexagon socket head cap bolt with washer M5 x 12 mm hexagon socket head cap bolt with washer M4 x 12 mm hexagon socket head cap bolt without washer Quantity 2 Application For installing setting plate 2 For securing projector 2 For installing wall plate cover Use the bolts supplied with the setting plate to install it, as directed in this guide. Use commercially available M8 x 50 mm anchors (at least 3) or 8 x 80 mm lag bolts (at least 3) to attach the wall plate to the wall. Warning ❏ When you mount the projector on the wall with the setting plate, the wall needs to be strong enough to hold the projector and the setting plate. Confirm the mass of the projector and the setting plate before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce the wall before installation. Install the setting plate so that it can sufficiently support the mass of the projector and setting plate, and resist any horizontal vibration. Epson takes no responsibility for any damage or injury caused by incorrect installation.  ❏ B Determine the projection distance and pull out the slider (1) From the projection distance table, calculate the distance (a) from the projection surface to the front of the projector. (2) Loosen the four screws and pull out the slider on the setting plate. Align the slider with the mark slider measure that is a distance (a+x) equivalent to the distance (a) plus the thickness of the projection screen (x). Book Page 15 Friday, November 27, 2009 4:31 PM C Attach the setting plate to the wall plate (2) Lift up the setting plate and pass the cables through it (B). Caution Take care not to trap the cables between the setting plate and wall plate. (3) Tighten the two M8 x 15 mm hexagon socket head cap bolts and two M8 x 35 mm hexagon socket head cap bolts supplied with the setting plate so that the setting plate becomes vertical against the wall (C). [. . . ] Screws (2) Cable cover Only a specialist should remove or reinstall the projector, including for maintenance and repairs. Refer to the User’s Guide of your projector for instructions on maintenance and repairs. Book Page 22 Friday, November 27, 2009 4:31 PM Warning ❏ Never loosen the bolts and nuts after installation. If the screws are not tightened firmly, the projector or setting plate may fall and cause personal injury or property damage. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON WORKFORCE PRO WF-8090 DW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON WORKFORCE PRO WF-8090 DW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.