Detailed instructions for use are in the User's Guide.
[. . . ] Checking Accessories
When unpacking the projector and accessories from their box, check that the following items are included. If any items are missing, contact your vendor or an Epson Service Center.
· Projector main unit · Lens cover with cord · Remote control · Two remote control batteries (AA manganese, R6)
· Power cord
· Computer cable
· A/V cable (red/white/yellow)
· USB mouse cable
· PS/2 mouse cable
· Instruction Manual (this manual)
PS/2
· Soft case
Some references to "the unit" or "the projector" in this Manual also refer to accessories supplied with the projector or components sold separately from the projector itself.
In This Manual
Getting Started Safety precautions and component names and functions Setup Special notes on setup, setup instructions, and screen size and projection distance details Projecting Images Connecting with different devices and projecting and adjusting images What You Can Do Functions to get the most out of your projector Menu Functions (Remote Control Only) Basic menu functions and settings Troubleshooting Troubleshooting projection failure, bad projection, and other problems Maintenance Performing lamp replacement and other routine maintenance and care General Notes Optional parts, shipping instructions, glossary, index, specifications and international warranty
1
Contents
In This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Make detailed settings for the horizontal bar function assigned to the remote control Effect2 button. Width : Select the width of the horizontal bar from 2-20 dots (in 2-dot steps). L : Low M : Medium H : High Returns Effect menu settings to their factory shipping values. To reset all menus to factory shipping values, use the Reset All menu.
Horizontal Bar
Cursor Speed
Reset
50
5. 5 Setting Menu
Displaying Menus
Press the Menu button, use the Enter button to select "Setting" from the top menu displayed, and press the Enter button to move to a submenu.
Settings
Menu Keystone Content If the screen is distorted in trapezoidal form, adjust it to normal display.
-: Broadens upper screen Normal screen +: Broadens lower screen
* · You can also adjust the screen with the Keystone button on the projector. You will need to readjust the image if the projection angle is changed. · If a keystone correction makes the image noticeably uneven, reduce the video sharpness with the menu commands Video > Sharpness. (Screen displays black. ) Black : "No-signal" is displayed on a black background (when the language is English). Blue : "No-signal" is displayed on a blue background (when the language is English). Set whether the input source currently selected is displayed/not displayed on the screen. ON : After input source switching, the input source is displayed for approximately 3 seconds.
Prompt
OFF : The input source is not displayed.
51
Menu A/V Mute* (See page 74)
Content Temporarily eliminates video during a presentation in order to focus attention on the presenter or elsewhere. After sleep mode is activated, the projector enters standby mode when no signal is input from an external source for a continuous period of 30 minutes. ON : Sleep Mode active OFF : Sleep Mode inactive Returns Setting menu settings to their factory shipping values. To reset all menus to factory shipping values, use the Reset All menu.
Sleep Mode
Reset
52
5. 6 Advanced Menu
Displaying Menus
Press the Menu button, use the Enter button to select "Advanced" from the top menu displayed, and press the Enter button to move to a submenu.
Settings
Menu Language Content Select the menu language. Select from Japanese, English, German, French, Italian, Spanish, Portuguese, Chinese and Korean. Use color temperature or RGB to create settings for the colors displayed on screen. Select "Color Temp" and press the Enter button to create settings. This setting is used for projection with the projector hanging from a ceiling. To reset all menus to factory shipping values, use the Reset All menu.
Color Setting
Rear Proj.
Ceiling
Reset
53
5. 7 About Menu
Displaying Menus
Press the Menu button, use the Enter button to select "About" from the top menu displayed, and press the Enter button to move to a submenu.
Setting and Display Information
The settings information displayed in the About menu differs as shown below during video projection from a computer/component versus a video device.
Computer/Component Video Projection Video Projection
D-Sub15: Computer/Component video Video: Video image Menu Lamp Reset Lamp Timer Video Source Input Signal Frequency Content Displays cumulative lamp-on time. (When set to Auto in the menu, "Auto (NTSC)" is displayed. ) : Display : No display Video Projection D-Sub15 Video
SYNC Polarity SYNC Mode Resolution Refresh Rate Video Signal
54
5. 8 Reset All Menu
Displaying Menus
Press the Menu button, and use the Enter button to select "Reset All" from the top-level menu displayed.
Settings
Menu Reset All Content Returns all menu settings to initial settings. (Lamp and language settings excluded) * Note that rear and invert settings will also be cleared by this operation.
55
Initial Settings List
Initial settings at product shipment are shown below.
Main Menu Title Video (Computer/ Component Video) Submenu Title Position Tracking Sync. Brightness Contrast Sharpness Gamma Input Signal Auto Setup Aspect Ratio Position Brightness Contrast Color Tint Sharpness Gamma Mode Aspect Ratio Volume Tone Audio Input Cursor/Stamp Initial Settings Central value Dependent on the connected signal 0 Central value Normal RGB ON 4:3
Video (Video)
Central value
Normal Auto 4:3 Central value Auto Shape: Zoom Rate: 100% Width: 2 M Central value Blue ON Black OFF
Audio
Effect
Setting
Advanced
Horizontal Bar Cursor Speed Keystone No-Signal Msg Prompt A/V Mute Sleep Mode Language Color Setting Rear Proj. Ceiling
Color: Magenta
Color Temp, (Computer/Component video: 7500K, Video: 6700K) OFF
56
6
Troubleshooting
6. 1 6. 2 Possible Failures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 When Indicators Do Not Help. . . . . . . . . . . . . . . . . . . . . . . 60
57
6. 1 Possible Failures
If you think your projector may have failed, first check the indicators on the unit. [. . . ] 401 Commonwealth Drive #01-01 Haw Par Technocentre SINGAPORE 149598 Tel: 4722822 Fax: 4726408 TAIWAN : EPSON Taiwan Technology & Trading Ltd. 10F, No. 287, Nanking East Road, Section 3, Taipei, Taiwan, China Tel: 02-2717-7360 ext. 327 Fax: 02-2713-2155 http://www. epson. com. tw THAILAND : EPSON (Thailand) Co. , Ltd. 24th Floor, Empire Tower, 195 South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand. [. . . ]