User manual ENERMAX GALAXY EVO EGX850EWT

[. . . ] Ignoring connector's wrong insertion prevention design by attaching a connector to a device in wrong orientation. Connecting too many devices to one cable unit by using additional adaptor (Y cables). This ENERMAX Technology Corporation product is warranted to be free from defects in material and workmanship for a period of three (3) years from the date of purchase. [. . . ] When the system is turned off, or goes into ACPI S3/S4 sleep mode, the PSU fan will keep dissipating the remaining heat for 30 ~ 60 seconds and prolonging system lifetime. #2 When assembling or maintaining the system, please remove AC cord from AC inlet, or turn ON/OFF switch into "OFF" position, and wait PowerGuard LED light off. All connectors are designed to prevent insertion in wrong orientation. If you cannot easily insert a connector, please check if you are inserting the connector in the right orientation. This might damage power supply and system components, and warranty shall be void. Following graphic illustrates the modular sockets layout and its DC rail distribution. 12P RED sockets The red sockets provide 12V for modular cable to power graphics card, CPU or RAM. 4+4P (8P) CPU +12V, in split mode Native cable, 12V rail supplied 12V1 & V2 4-pin configuration supports certain single CPU systems. Some multi-CPU workstation/server system might also need this extra 4-pin 12V connector. 6+2P (8P) PCI Express, in combined mode Native cable, 12V rail supplied by 12V3 8-pin configuration supports latest extreme graphic cards, which require 8-pin PCI-E connector. 6+2P (8P) PCI Express, in split mode / 6P PCI Express Native cable, 12V rail supplied by 12V3 6-pin configuration supports most performance PCI-E graphic cards, which require 6-pin PCI-E connector. 4P Molex # 2 For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. Normally, use either one of power connector to power the driver, BUT NOT BOTH!#2 Some MB might require this connector to share the +12V current from 24-pin Mainboard connector to PCI-E slot. [. . . ] If yes, wait till it cool down and restart the system to see if all system fans and PSU fan are running. - If same situation repeat, recheck if all connectors are well connected to system, or redistribute certain drives/PCI-E power to different 12V rail connector. If you have any question or need support, please contact your reseller or nearest ENERMAX subsidiary/agent or ENERMAX headquarter service center. [. . . ]