User manual ELGATO EYETV LITE SOFTWARE

[. . . ] The following instructions explain how to hook up EyeHome to a TM wireless network using AirPort Express . Installation Guide Setting up your AirPort Express TM First of all, the assumption is that you already have an 802. 11 g network, using Apple's ® AirPort technology. [. . . ] Launch Software Update from the Apple menu and update your AirPort Software to the latest version. Find your AirPort Extreme Base Station in the list and double click it. Check "Enable this base station as a WDS main base station". If you have connected wireless computers to your base station check "Allow wireless clients on this base station". A sheet will drop down that lists your AirPort Express with the attribute "WDS set up successful. Wait for the base stations to restart and for the AirPort Admin Utility configuration ® TM window to close. Quit AirPort Admin Utility and disconnect your AirPort Express from the computer and connect it to EyeHome using an Ethernet cable. For more information about setting up your Airport ExpressTM, contact Apple at www. apple. com. EyeHome Customer Support can also help you with issues relating to EyeHome at www. elgato. com/support. ® TM ® ® TM ® ® ® 1 Setting up EyeHome with AirPort Express TM version 050131_4. 1 [. . . ] Quit AirPort Admin Utility and disconnect your AirPort Express from the computer and connect it to EyeHome using an Ethernet cable. For more information about setting up your Airport ExpressTM, contact Apple at www. apple. com. [. . . ]