User manual EINHELL DS 5-1

[. . . ] We accept no liability for damage or accidents which arise due to non-observance of these instructions. Packaging The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. [. . . ] Always wear protective clothing when spraying pesticides and insecticides. Ensure that liquid sprays are not heated beyond the permitted operating temperature of 40 °C. When mixing and working with spray solutions, always follow the manufacturer's instructions. Each time the spraying unit has not been used for an extended period of time it should be checked for possible damage prior to reusing it. Before placing the unit in winter storage, thoroughly clean and dry it out so that it is not damaged by freezing temperatures. We will not be liable for any damage that results from improper repairs and/or improper handling of the unit (e. Opening the unit or performing maintenance work on it is only permitted when the tank is depressurized. To relieve the pressure, pull up the funnelshaped knob connected to the safety valve. Pump / carry handle Spray lance Release lever Tank Strap Safety pressure valve Integral filler neck Adjustable spray head Do not unscrew the overpressure valve (Figure 1/6) Check to ensure that the screw connections for the hose at the spray gun handle and on the tank are tight!Starting and filling the unit Before you unscrew the pump, raise the pressure valve (Fig. Press down the pump handle as far it will go and slowly unscrew the pump (counterclockwise). Fill the tank up to a maximum of the 5 liter mark with the spray solution. Insert the pump, press down the pump handle as far it will go and screw in the pump (clockwise) until it is tight again. Note: The bayonet lock must be properly latched whenever you transport the pressure sprayer. Release the pump handle from the bayonet lock by turning it counter-clockwise slightly. Pressure is built up in the tank by pumping the pump handle (up and down). [. . . ] For warranty claims to be accepted, the product has to receive the correct maintenance and be put to the proper use as described in the operating instructions. Your statutory rights of warranty are naturally unaffected during these 2 years. This warranty applies in Germany, or in the respective country of the manufacturer's main regional sales partner, as a supplement to local regulations. [. . . ]