User manual EINHELL BG-US 2.5

[. . . ] Make sure that the ON/OFF switch is not activated before you remove any blockages, clean the equipment, perform any maintenance or place the equipment in storage. Never remove blockages with your fingers - use a stick or a similar tool. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. [. . . ] The equipment may only be used for the tasks it is designed to handle. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes. 1 / Item 2) Each spreader material is supplied with instructions on how many grams per square meter are to be spread. set a low flow rate for smaller quantities and increase the flow rate for larger quantities. The following settings are recommended: Setting 1: fine grass seeds Setting 2: coarse grass seeds Setting 3: light fertilizer Setting 4: heavy fertilizer Setting 5: pearled fertilizer or de-icer Note: Numerous variable factors (such as walking speed, working height, motor speed etc. Rather, the optimal setting must be determined by the user when starting with the work. 1/3) Note: The ON/OFF switch (6) activates the opening for the spreader material as well as the spreader wheel. You cannot actuate the ON/OFF switch (6) until you have pushed back the switch lock (1). The switch lock may become detached if you fail to observe this point. Ensure that the ON/OFF switch (6) is not activated and that the infinitely adjustable speed controller (5) is set to position "0". Place the spreader on a paved surface and fill spreading material into the spreading material Area coverage: Spreading width: Spreader material compartment volume: LWA sound power level: LpA sound pressure level: Vibration aw: Weight excluding batteries: 6 V DC 4 x Mignon (AA) 750 m2 0. After carrying out work on a small area, adjust the settings if necessary. The equipment and its accessories are made of various types of material, such as metal and plastic. Before carrying out any cleaning work, make sure that the ON/OFF switch is not activated and that the infinitely adjustable speed controller is set to position "0". 1 Cleaning Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure. We recommend that you clean the equipment immediately after you use it. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the appliance. 2 Servicing There are no parts inside the equipment which require additional maintenance. 3 Ordering replacement parts Please provide the following information on all orders for spare parts: Model/type of the equipment Article number of the equipment ID number of the equipment Spare part number of the required spare part For our latest prices and information please go to www. [. . . ] Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. no guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. [. . . ]