User manual DSC LCD-5501Z

[. . . ] Using the LCD5501Z Keypad WARNING: Please refer to the System Instruction Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. 1. Emergency Keys The LCD5501Z keypad shows the status of your security system using an LCD-style display, along with fixed words and numbers. [. . . ] Emergency Keys: Press both * keys for two seconds to send a FIRE message. Press both * Keys for two seconds to send a PANIC message. * IMPORTANT NOTE (All Keypads): The Fire, Auxiliary and Panic keys will NOT function unless programmed by the installer. If these keys are in service and the installer has enabled audible feedback, holding down the key for two seconds will cause the keypad sounder to beep indicating that the input has been accepted and sent. Armed Light If the Armed light is ON, the system has been armed successfully. Trouble Light If the Trouble light is ON, press to view the troubles. The keypad will indicate the troubles using numbers 1-8 at the top of the keypad display. See "Identifying Trouble Conditions" in your system's Instruction Manual. Using the LCD5501Z Keypad The LCD5501Z works similarly to the other keypads described in your system's Instruction Manual. For more information on individual functions, see your system's Instruction Manual. light will be off. Before you try to arm your system, go to the open zones and close all doors and windows, and make sure no one is present in zones with motion detectors. Viewing Open Zones Before you can arm your system, all the zones must be closed. If some zones are currently open, the keypad will display "Open", and the Ready Viewing Zones in Alarm If there is an alarm on your system the keypad will display "Alarm" and will scroll the numbers of the zones affected. System Functions - Quick Reference The following chart lists the basic functions of your system and the keys to press for each function. Ask your installer for more information. To do this: Press this: Arm system (Away): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [access code], leave through entry/exit door (if enabled) OR press Arm system (Quick): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (from Ready state) Arm system (Stay): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [access code], do not exit premises (if enabled) OR press Arm system (No Entry Delay): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] View troubles: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See "Viewing Trouble Conditions" in Instruction Manual for list of trouble definitions) Printed in Canada 29004451 R001 [master code] to toggle on or off OR press (if enabled) © 1999 Digital Security Controls Ltd. [. . . ]