User manual DOLMAR HT-2360D

[. . . ] WARNING: To reduce the RISK of injury, user must read and understand the instruction manual before using the hedge trimmer. manufacturer reserves the right to change specifications without notice. We are pleased to be able to offer you the DOLMAR hedge trimmer which is the result of a long development program and many years of knowledge and experience. The hedge trimmer models HT-2350D, HT-2360D and HT-2375D combine the advantages of state-of-the-art technology with ergonomic design, light weight, handy, compact and represent professional equipment for a great variety of applications. [. . . ] To obtain optimum engine operation and to protect your health and the environment, only unleaded fuel should be used!- For lubricating the engine use a two-stroke engine oil (quality grade: TSC-3), which is added to the fuel. The engine has been designed for use with DOLMAR two-stroke engine oil and a mixture ratio of 50:1 only to protect the environment. In addition, a long service life and a reliable operation with a minimum emission of exhaust gases is guaranteed. It is absolutely essential to observe a mixture ratio of 50:1 (DOLMAR 2-stroke engine oil), otherwise the reliable function of the hedge trimmer cannot be guaranteed. - The correct mixture ratio: Gasoline: Specified two-stroke engine oil = 50 : 1 or Gasoline: Other manufacturer's two-stroke engine oil = 25 : 1 recommended NOTE: For preparing the fuel-oil mixture, first mix the entire oil quantity with half of the fuel required in an approved canister which meets or exceeds all local code standards. Thoroughly shake the mixture before filling it into the hedge trimmer's tank. It will only result in a higher production of combustion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. Do not inhale fuel vapors, avoid any contact of fuel or oil with your skin. If your skin comes in contact with these substances repeatedly and for an extended period of time, it will desiccate. - Stop the engine during refuelling, keep away from flames and do not smoke. - Take care not to spill either fuel or oil in order to prevent soil contamination. Change your clothes instantly if fuel has been spilled on it (to prevent clothes catching fire). - Inspect the fuel cap regularly making sure that it can be securely fastened and does not leak the fuel. Change location to start the engine (at least 3 meters away from the place of refuelling. - Thoroughly clean the area around the tank cap to prevent dirt from getting into the fuel tank. - Make sure that there are no children or other people within a working range of 15 meters. In case of excessive fuel intake, remove the spark plug and pull the starter handle slowly to remove excess fuel. ) When restarting a hot engine, first try the above procedure: 1, 2, 4, 5, 6 with the choke lever (4) to " ". - Never touch the cutting blades when starting the engine and during operation. - Operate the hedge trimmer in such a manner as to avoid inhalation of the exhaust gases. - All protective equipment such as a guard supplied with the machine must be used during operation. [. . . ] Points in handling the air cleaner elements - Clean the elements several times a day, if excessive dust adheres to it. - If operation continues with the elements remaining not cleared of oil, oil in the air cleaner may fall outside, resulting in oil contamination. - Only use the supplied universal wrench to remove or install the spark plug. If the spark plug is clogged with carbon or fouled, clean it thoroughly or replace it. [. . . ]