User manual DAXTEN DOMINION SX

[. . . ] Installation and Operations Manual SX4 SX8 SX16 SX32 SX48 Raritan Computer Inc. 1-732-764-8887 E-mail: sales@raritan. com http://www. raritan. com Raritan Computer Japan, Inc. Shinkawa NS Building 1-26-2 Shin-kawa, Chuo-ku Tokyo 104-0033 Japan Tel. 81-03-3523-5992 E-mail: sales@raritan. co. jp http://www. raritan. co. jp Raritan Computer Europe, B. V. [. . . ] Because the per-port logging application runs at a privileged level, the NFS server used must also be set up to allow root access. Set the no_root_squash option for the directory set up to receive the port log files. Example /etc/exports entry: /nfs/domlogging 192. 168. 0. 0/16 (rw, no_root_squash) 2. Example /etc/exports entry: /nfs/domlogging 192. 168. 0. 0/16 (rw, all_squash, anonuid=700, anongid=700) Make certain that the GID/UID pair has write permission to the particular directory. Explaining these concepts or providing other information about NFS is beyond the scope of this document. Please provide your Systems Administrator with the above information, and ask them any additional questions about setting up the NFS server; should they have any additional questions, please contact Raritan support. CHAPTER 9: SNMP 81 Chapter 9: SNMP SNMP Trap Configuration The Raritan Enterprise MIB can be accessed via the FAQ Support section on Raritan's Web site, www. raritan. com. Name snmp [<enable|disable> [COMM_NAME]|<add|del> RECIPIENT>] Description Configure the SNMP feature. snmp <enable|disable> [COMM_NAME] Depending on the parameter, enable or disable SNMP traps. Specify the community name used to send traps using the optional COMM_NAME parameter. A recipient is an IP address with an optional space- separated port number. If a recipient with a port number is to be removed, include the port number in the delete command. NOTE: At this time, the Dominion SX system must be rebooted for configuration changes (other than disabling SNMP) to take effect. Example:( in this example, the username is TANAKA) TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 TANAKA:Command>snmp add 10. 0. 0. 56 78 Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 10. 0. 0. 56:78 TANAKA:Command>snmp del 10. 0. 0. 56 Any SNMP configuration changes require rebooting to take effect. 82 DOMINION SX INSTALLATION AND OPERATIONS MANUAL TANAKA:Command>snmp del 10. 0. 0. 56 78 Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: N Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 TANAKA:Command>snmp enable Any SNMP configuration changes require rebooting to take effect. TANAKA:Command>snmp Enabled: Y Community: public Trap Destinations: 10. 0. 0. 125 6. 6. 6. 6 CHAPTER 10: SYSTEM CONFIGURATION 83 Chapter 10: System Configuration Local Port Access Configuration Name lpa [<enable|disable> [BPS]] Description Configure the Local Serial Port Access feature. lpa <enable|disable> Depending on the parameter, enable or disable usage of the serial port for LPA. lpa <enable|disable> BPS Enable or disable LPA as above, but the optional port speed is set. Note: On the SX 4 and SX 8, and other SX units with only one serial port, the serial port labeled MODEM has to be shared between modem and local port access usage. Newer SX 4 and SX 8 units may have two serial ports; with firmware release 2. 2 the port labeled MODEM has to be used for connecting a local VT100 terminal or PC/workstation/laptop with HyperTerminal or other VT100 terminal emulation program. In a future release, the second serial port labeled TERMINAL will be enabled. Valid port speeds are: · · · · · · 4800 9600 19200 38400 57600 115200 Example: ( in this example, the username is TANAKA) TANAKA:Command>lpa Local Port Access Enabled: No BPS: 9600 TANAKA:Command>lpa enable Local Port Access Enabled: Yes BPS: 9600 TANAKA:Command>lpa enable 38400 Local Port Access Enabled: Yes BPS: 38400 TANAKA:Command>lpa disable Local Port Access Enabled: No BPS: 38400 84 DOMINION SX INSTALLATION AND OPERATIONS MANUAL Note: If the user issues the command lpa enable AFTER changing the default port speed, the next time the command lpa enable is used without the optional port speed parameter, the port speed last set, e. g. , 38400, will be used as a default; to override it, enter the lpa enable command with the new port speed explicitly specified, e. g. , lpa enable 9600 Name reset Description reboots unit, which may be required after some configuration changes, and may also be used to log-off all users Service (Telnet and SSH) Configuration IMPORTANT NOTE: Telnet service should only be enabled when Dominion SX server's default TCP port is NOT set to 23, otherwise the unit will become unresponsive to http and ssh clients. If the unit is currently set to port 23, please change it to 2200-2400 range BEFORE enabling Telnet. [. . . ] Once setup is complete, you will log off the console, and use the IP address you assigned during setup to re-access the unit. 160 DOMINION SX INSTALLATION AND OPERATIONS MANUAL QUESTION Once I have assigned the unit a unique IP address, how do I access the unit in the future?Sometimes when I try to log on, I see a message that states my "login is incorrect" even though I am sure I am entering the correct User Name and Password. Why is this? ANSWER Open your supported Web browser (Netscape or Internet Explorer), enter the IP address you have assigned to that unit into the Address field and press the <Enter> key. There is a session-specific ID that is sent out each time you login to the unit. [. . . ]