User manual COMCAST ON DEMAND

[. . . ] In the AUX mode, use this key to switch the VCR, PVR (or DVR), or DVD player to view TV or video. Use Enter to enter channels on some TV models or information on menu screens. PROGRAMMING DEVICE CONTROL The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the AUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section: 1. Turn on a device (e. g. , VCR or DVD Player) and, if applicable, insert media, (e. g. , video cassette or disc). NOTE: Please read steps 2 to 6 completely before proceeding. [. . . ] For example, to have the unit control a TV, a Cable Box, and second TV, you will need to reassign the unused AUX key to operate the second TV as follows: 1. Then press and hold Setup until the AUX key blinks twice, then release Setup. See Programming Device Control for instructions. 2. On the remote control, press a device key once (i. e. , AUX or TV). NOTE: Use the AUX key to program control of an Audio Amplifier or Receiver, a DVD Player, a HomeTheater-In-A-Box Device, a PVR (or DVR), or a VCR. SOLUTION: Replace the batteries with two (2) new AA batteries. PROBLEM: During programming, a mode key displays one long blink. 3. Press and hold Setup until the selected mode key blinks twice, then release Setup. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first. If you perform this procedure correctly, the selected mode key will blink twice. NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. 6. 4. Press Setup once to lock in the code. The TV key will blink twice. To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for. SOLUTION: An invalid entry has occurred. PROBLEM: A mode key blinks when you press a key, but home entertainment component does not respond. User Guide Fold 2. 4. OVERVIEW The Comcast Custom 3-Device universal remote will control up to three home entertainment devices, including a Cable Box (used by Comcast Systems), a TV, a VCR, an Audio Amplifier or Receiver, a DVD player, or a PVR. The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. In the AUX or TV mode, use the transport keys to control a VCR, PVR, or DVD player. Use A, B, or C to access interactive program guide functions on your Scientific Atlanta Explorer, Pioneer Voyager, or Pace Cable Box. Use Lock to restrict viewing of selected programs (Parental Control) on your Motorola (GI or Jerrold) Cable Box. Use PPV to access information on available Pay-Per-View movies and events on your Motorola (GI or Jerrold) Cable Box. Use Page+ (or Page-) to page up (or down) through menu screens and the interactive program guide. Use Guide to display the interactive program guide. 5. Unlocking Volume Control For A Single Device (Individual Volume Unlock): 1. Press a desired mode key where you want volume to be unlocked (e. g. , AUX) and controlled within its own mode. Press and hold Setup until the selected mode key blinks twice, then release Setup. If desired, repeat steps 1 to 3 (of this section) for each device that you want volume to be unlocked. Now, after you select a device that has volume unlocked (e. g. , AUX), pressing VOL+, VOL-, or Mute, will control the device's volume only in its own mode. CHECKING THE CODES If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. [. . . ] Now, the remote control will provide TV or cable channel control capabilities while in the TV or Cable mode. SOLUTION: Due to RCA design (19831987), only the original remote control will operate these functions. Repeat steps 1 to 7 for another device you want to control. 2. 2. 3. NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 10 minutes to ensure all of your programming information is restored. Repeat step 4 three more times for the remaining digits. [. . . ]