User manual COMCAST HD REMOTE CUSTOM DVR 3 DEVICE

[. . . ] 4. Use the keypad (0 ~ 9)to directly select the channels (e. g. , 09 or 031). In the tv mode, use this key to switch the TV's input to view TV or video programs. In the aUX mode, use this key to switch the VCR, PVR (or DVR), or DVD player to view TV or video. Use the PIP Function keys to operate the PIP functionality of your converter and TV (If Available) 6. NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. [. . . ] 3. 7. For future reference, write your device code in the appropriate boxes below: aUX Code: 3. Press and hold setup until the selected mode key blinks twice, then release setup. Now, volume controls for all devices can be independently controlled in their own modes. re-activating Channel Control lock 1. On the remote control, press Cable once. Then press and hold setup until the Cable key blinks twice, then release setup. Now, regardless if you select the tv or Cable mode, only the channel control capability of your cable box will be accessible. Device Type:______________ tv Code: 5. 2. 3. 3. 8. Repeat steps 1 to 7 for another device you want to control. User guide Overview The Comcast Custom DVR 3-Device universal remote will control up to three home entertainment devices, including a Digital Video Recorder enabled Cable Box (used by Comcast Systems). The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. The Comcast Custom 3-Device universal remote control is preprogrammed at the factory to operate the Cable Box supplied by your Comcast system, an RCA TV, and an RCA VCR (in the aUX mode). To control devices other than default brands (excluding the Cable Box), perform the below steps; otherwise skip this section: 1. Turn on a device (e. g. , VCR or DVD Player) and, if applicable, insert media, (e. g. , video cassette or disc). NOTE: Please read steps 2 to 6 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. PrOgraMMing deviCe COntrOl searCHing FOr YOUr COde If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then: 1. Then press and hold setup until the tv key blinks twice, then release setup. Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device 5. Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. Repeat step 4 four more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit. Finish writing down the code in the TV Code boxes (at end of this section). To check another device code, repeat steps 1 to 5, but substitute the aUX key for the auxiliary device you are checking. Write down the codes in the appropriate boxes below: aUX Code: locking volume Control to tv or aUX Mode: 1. Press and hold setUP until the Red light flashes twice, then release setUP. Press and release either tv or aUX (Red light for selected device will flash twice). trOUBlesHOOting PROBLEM: A mode key does not blink when you press a key. [. . . ] This will guarantee that you do not inadvertently change a channel while in the TV mode. However, you can turn off this feature to allow full access to these keys in the tv and Cable NOTE: When batteries need replacement, the remote control will stop operating. Replace the old batteries and the unit will be restored to its full functionality, complete with your favorite settings. 6. 7. 5. Press setup once to lock in the code. The tv key will blink twice. [. . . ]