User manual CITIZEN WATCH D71

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CITIZEN WATCH D71. We hope that this CITIZEN WATCH D71 user guide will be useful to you.


CITIZEN WATCH D71 : Download the complete user guide (1666 Ko)

You may also download the following manuals related to this product:

   CITIZEN WATCH D71 (2924 ko)
   CITIZEN WATCH D71 (1698 ko)
   CITIZEN WATCH D71 (1708 ko)

Manual abstract: user guide CITIZEN WATCH D71

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTION MANUAL D710/ D716 Unauthorized reproduction of any or all of this manual is strictly prohibited. The manufacturer is not responsible for any or all damages, lost profits or demands from a third party resulting from use of this manual or products described therein. · Windows 98, Windows 98SE, Windows Me, Windows 2000 and Windows XP are registered trademarks or trademarks of the Microsoft Corporation, USA. · Other firm names and product names contained in this manual are also the registered trademarks or trademarks of their respective firms. [. . . ] When this warning function is activated, charge the watch by attaching to the charger as soon as possible. The display will return to normal once the watch is sufficiently charged. * None of the dive alarms sound when the insufficient charge warning function is activated during diving. Although the dive computer will function normally for about 30 minutes after "BATT" starts to flash, the log data for that dive is not recorded after "BATT" has started flashing. Promptly begin to ascend it this warning function is activated during diving. * If the watch remains insufficiently charged after the insufficient charge warning function has been activated, it switches to the low power mode after about 2 days. Please note that if the watch continues to be left uncharged in the low power mode, all functions stop and all watch settings return to the initial (default) settings. File Error Warning When the amount of available memory in flash memory becomes low, "FILE" flashes in the lower left corner of the display in all of the modes of the standard mode as well as in the dive mode. The watch automatically switches to the flash memory status display of Flashing the system monitor mode when the water sensor gets wet while this warning function is activated. Please note that although it is possible to use the watch for diving in this state, log data may not be recorded in flash memory during diving. The file error warning function is also activated and additional log data is not recorded if the duration of a single dive exceeds 2 hours or if more than 15 dives are made in a single day. The file error warning function may also be activated when the water temperature during diving is low. It may not be possible to receive watch settings by data communication while the file error warning function is activated. When the watch has switched to the file error warning display, perform the garbage collection procedure in the system monitor mode of the standard mode. The display returns to normal following completion of garbage collection. 48 Abnormal Pressure Detection Error Warning When abnormal atmosphere pressure is detected during use on land, or when ascending to high locations more than 3, 000 m (10, 000 ft) above sea level, "ERR" (Error) flashes in the lower left corner of the display. The watch does not switch to the dive mode even if the water sensor gets wet while this warning function is activated. Flashing If "ERR" does not disappear from the display even after a long period of time, there may be a problem with the pressure sensor. When this happens, discontinue using the watch and consult a Citizen Service Center. Water Sensor Check Warning If the preliminary dive display continues to be displayed for more than 1 hour after the water sensor has gotten wet and the watch has switched to the preliminary dive display in the dive mode, "CHK" (Check) flashes in the lower left corner of the display to inform the wearer that the water sensor should be checked. Flashing * "CHK" also flashes when the watch returns to the normal display from any of the correction states, when the watch is returned to the time mode of the standard mode from the infrared communication mode, and when the water sensor is operating during the all reset procedure. The watch does not switch to the dive mode (water depth measurement display) when "CHK" is flashing. To check the sensor, remove any debris or moisture from the water sensor with a dry cloth. The display returns to normal when the water sensor is canceled. Ascent Rate Warning When the ascent rate during scuba diving exceeds 18 m (60 ft)/min, the ascent rate warning alarm sounds for 5 seconds and "SLOW" and an illustration of a turtle are displayed at the bottom of the display. The ascent rate warning alarm stops sounding when a proper ascent rate is resumed. * The ascent rate warning alarm does not sound during skin diving (continuous diving for less than 3 minutes at a depth of 1 m (4 ft) or more). Abnormal Depth Warning When a sudden change in depth of more than 4 m (13 ft)/sec is detected during diving, the watch assumes that the watch has reached an abnormal depth. At this time, "ERR" and the diver mark are alternately displayed in the lower left corner of the display. Once "ERR" has been displayed during diving, it continues to be displayed until the dive mode is terminated. Flashing CAUTION Avoid using this watch in environments subject to sudden changes in water pressure such as when using ocean floor excavation or similar equipment. The vibrations from such equipment may cause a change in water pressure of "4 m (13 ft) or more per second" to be locally and momentarily applied to the pressure sensor of the watch, causing "ERR" to be displayed and preventing water depth from being displayed correctly. 49 Exceed Maximum Depth Warning When the limit depth of 40 m (131 ft) for recreational diving is surpassed during the course of diving, an exceed maximum depth error occurs, the current depth flashes and the alarm sounds for 15 seconds. During diving at a depth greater than 40 m (131 ft), the warning alarm sounds for 15 seconds every minute. [. . . ] If you notice that you skin is affected by the watch, immediately stop wearing it and consult a physician. <Cleaning the Watch> · Use a soft cloth to wipe off dirt, perspiration and moisture from the case and crystal. · Rinse off dirt from metal bands, plastic bands or rubber bands with water. Use a soft brush to remove any dirt or debris stuck between the gaps in metal bands. · Avoid the use of solvents (such as thinner or benzine) as they may damage the finish. CAUTION Precautions When Wearing the Watch · Be careful while wearing the watch while holding an infant or child, by taking the watch off beforehand, to prevent injury or other accident. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CITIZEN WATCH D71




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CITIZEN WATCH D71 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.