User manual CDA CPXI9

[. . . ] CPXI9 Curved Glass Island Extractor Manual for Installation, Use and Maintenance The CDA Group Ltd Harby Road Langar Nottinghamshire NG13 9HY Customer Care Fax: 01949 862003 Website: www. cda. eu Telephone: 01949 862012 Email: service@cda. eu MAINS ELECTRICITY CONNECTION: THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET AND PROTECTED BY A 3A FUSE. [. . . ] When installing this product we recommend you seek the help of another individual The manufacturer declares that this product meets all the essential requirements for low voltage electrical material set out in European directive 2006/95/EEC of 12 December 2006 and for electromagnetic compatibility as required by European directive 2004/108/EEC of 15 December 2004. IMPORTANT: Before any type of Use maintenance, make sure that the power For optimal performance, the extractor to the extractor is switched off. should be switched on prior to cooking and left running for approximately 15 minutes Cleaning Clean the exterior of the extractor with a after the end of cooking. mild liquid detergent and avoid the use of abrasive cleaning products. Five button control panel Cleaning the grease filter Depending on use, and at least once a month the grease filter should be disassembled and cleaned with hot soapy water. The filter can also be washed in a dishwasher, and should be placed in an upright position to prevent damage from other items in the dishwasher. Please note: Cleaning the filter in the dishwasher may lead to discolouration. This is purely cosmetic and does not affect in any way the lifespan of the filter. This panel is situated on the front of the extractor and includes: On indicator for the light (A) On/off button for the light (B) Off button for the motor (C) Speed 1, 2 and 3 switches for the motor (D) Maintenance Changing the light Remove the grease filter and replace the light with a light bulb no more powerful than that specified on the feature plate. [. . . ] The manufacturer reserves the right to effect any technological improvement or modification without prior notice. [. . . ]