User manual CANON DR-5060F BROCHURE

[. . . ] These cards are collectively called memory cards in this guide. * SD stands for Secure Digital, a copyright protection system. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc. , caused by the malfunction of non-genuine Canon accessories (e. g. , a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. 1 Table of Contents Items marked with a are lists or charts that summarize camera functions or procedures. Conventions Used in this Guide . [. . . ] You can select how the file number is assigned. 1 (Set up) Menu [File numbering] reset]/[Continuous]. See Menus and Settings (p. 32). [Auto File Number Reset Function Continuous A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing folders or memory cards*. The folder and image number are reset to the starting value (100-0001)*. This is convenient for managing images on a folder-by-folder basis. Auto reset *When a blank memory card is used. If a memory card with recorded data is used, the 7-digit number for the last recorded folder and image is compared with the last one on the card, and the larger of the two is utilized as the basis for new images. 72 File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2, 000 images can be saved into a single folder. New Folder Created Memory Card 1 Continuous Memory Card Exchanged for Another Memory Card 1 Memory Card 2 Memory Card 1 Auto Reset Memory Card 1 Memory Card 2 Shooting Images may be saved to a new folder when there is insufficient free space even if the total number of images in a folder is less than 2, 000 because the following types of image are always saved together into the same folder. - Images from continuous shooting - Self-timer images (custom) - Stitch Assist mode images - My Colors images ([Save Original] set to [On]) Images cannot be played back when the folder numbers are duplicated or image numbers are duplicated within folders. Please refer to the Software & Wireless Guide for information regarding folder structures or image types. 73 Playback/Erasing Please also see the Basic Guide (p. 11). Magnifying Images 1 Press the zoom lever toward will display and a magnified portion of the image will display. Images can be magnified up to a factor of approximately 10x. . Approximate Location of the Displayed Area 2 Use the , , or around the image. button to move If you press the FUNC. /SET button while in magnified display, the camera switches to image advance mode and will display. 32). 2 Use the or button to select an image to to rotate it. rotate and press Cycle through the 90°/270°/original orientations with each press of the FUNC. /SET button. When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images. 80 Playback with Transition Effects You can select the transition effect displayed when switching between images. Usual display The displayed image darkens and the next image gradually brightens until it is displayed. Press the and the button to have the previous image display from the left button to have the next image display from the right. 1 (Play) Menu / . See Menus and Settings (p. 32). Playback/Erasing The transition effect will not display when an image is switched while the camera is reading an image from the memory card. Attaching Sound Memos to Images In playback mode (including single image playback and index playback), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format. 1 (Play) Menu . See Menus and Settings (p. 32). 81 2 3 Use the or button to select an image to attach a sound memo to and press . The sound memo panel will display. Select (Record) and press . The elapsed time and the remaining time display. Up to 60 seconds of recordings can be added to any one image. Sound Memo Panel Elapsed Time/ Remaining Time Volume (Adjust with the button) or Sound Memo Panel Exit Record Pause Play Erase Select [Erase] in the confirmation screen and press the FUNC. /SET button. You cannot attach sound memos to movies. Sound memos for protected images cannot be erased. 82 Automated Playback (Slide Shows) Automated Playback of Memory Card Images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 88). All Images Date Folder Movie Stills ­ Custom 1­3 Plays all images on a memory card in order. Plays the images selected for each slide show, Custom 1, Custom 2 or Custom 3, in order (p. [. . . ] · All other product and service names mentioned herein are the marks of their respective owners. · Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U. S. A. , use an attachment plug adapter of the proper configuration for the power outlet. 142 Copyright © 2005 Canon Inc. [. . . ]