User manual BOSCH WVD2452XEE

[. . . ] WVD24520 WVD2452X en Operating and Installation Instructions Table of Contents Operating instructions Information concerning waste disposal . 4 5 6 7 13 14 20 22 28 31 37 39 41 43 48 52 53 54 Installation instructions Installing, connecting and transporting . . 2 The new washer dryer which you have just purchased is a modern, high quality domestic appliance. Your washer dryer is distinguished by its economical consumption of energy, water and detergent. [. . . ] The drying programme starts. 29 i The almost empty progress bar is indicated in the display field. While the programme is running, the programme duration counts down and the progress bar fills up with the segments. The drying symbol appears. In the cooling down phase, the fan symbol appears. Washing Drying without interruption q Turn on the tap. q Touch the Dry Y button to set the desired drying time or automatic drying, the programme will be washing and drying without interruption. i The programme duration will be changed accordingly after the drying programme being set. See page 29. i Do not interrupt the drying process, if it is necessary, please select 15 minutes cooling programme before opening the loading door. i The following is displayed for the selected programme: - progress bar, - default rinse cycle(s), - maximum load (do not exceed max. load), - default spin speed, - default washing temperature, - drying time or automatic drying symbol, - programme duration. While the programme is running, the programme duration counts down and the progress bar fills up with the segments. The symbols for the running programme sections appears. 30 Washing/drying with individual settings You can adjust the settings to your requirements. The steps for changing the settings are described in detail overleaf. Overview at a glance Turn on the tap, load the laundry and close the loading door. Select desired washing/drying programme with programme selector. Temp. * Page 32 or cold wash Spin speed* Page 32 or without final spin Finish in time* Page 33 can be set in 1-hour steps Signal* Page 36 on off loudness Make further settings or press the Inicio/Pausa button. Childproof lock** Page 35 on off * Individual settings can be combined. **This function is recommended to avoid misoperation by casual touching. 31 Washing temperature You can change the default washing temperature. q Keep touching the temperature button until the desired temperature displays. Temp. i For different clothing, there are different programmes with respective temperature ranges. Spin speed You can change the default spin speed. i If setting (without final spin) has been selected, the washing remains in the final rinsing water. Before the laundry can be uplaoded, the b (Empty) or Centrif. adicional B (Spin) programme must be performed. Touch Spin B button to select the desired spin speed or touch the Inicio/Pausa button directly to start subsequent spin cycle with default spin speed. i The speed can be changed at any time by touching the Spin B button until the new speed is displayed. Setting "" (without final spin) is possible until the Rinse programme section starts. 32 Finish in time Example of Sintéticos 40 ºC programme: Before a programme starts, you can specify by how many hours later the programme is to be ended. q Touch the W Finish in button, the display shows the minimum finish in time of the selected programme. It depends on the duration of selected programme. q Touch the W Finish in button until the desired number of hours is displayed. [. . . ] 2. 20 m). 58 m ax. 100 cm ~150cm Connecting the water Water inlet hose d Risk of electric shock!To prevent leaks or water damage, it is essential to follow the instructions in this chapter!Do not connect to the mixer tap of an unpressurised hot water apparatus. Only use the inlet hose supplied or one which was purchased from an authorised specialist dealer. [. . . ]